Single Fins
Moderators: jimmy, collnarra, PeepeelaPew, Butts, Shari, Forum Moderators
Re: Single Fins
The 6'0 single feels glorious. Just bagged a handful of beautifully shaped righthand head high peaks out at the stormy and dunnybowl.
A series of highline trims, and cutting back into the bowl, over and over. It felt like silk.
A series of highline trims, and cutting back into the bowl, over and over. It felt like silk.
- el rancho
- Duke Status
- Posts: 12544
- Joined: Wed Aug 19, 2009 11:22 am
- Location: taking a shit in the dunes
Re: Single Fins
this morning I surfed my old brothers neilsen 5'10 single on some sweet A-frames that ran into long inside walls.
Re: Single Fins
Nice shape .
Took the 6'0 out today, but put the 9'0 volan fin in as it was a pretty solid 4-5 foot. The board felt great. Plenty of hold but still really easy to turn.
Took the 6'0 out today, but put the 9'0 volan fin in as it was a pretty solid 4-5 foot. The board felt great. Plenty of hold but still really easy to turn.
- el rancho
- Duke Status
- Posts: 12544
- Joined: Wed Aug 19, 2009 11:22 am
- Location: taking a shit in the dunes
Re: Single Fins
yeah the outline is beautiful. It really goes when you compress in the bottom turn more than normal.
I wanna copy it and shape some harder tucked rails.
I wanna copy it and shape some harder tucked rails.
Re: Single Fins
wow big fin.
like that plan shape el rancho, nice looking board.
like that plan shape el rancho, nice looking board.
Re: Single Fins
here is one I made earlier, enjoyed riding it for a few months from the start of the year, and still pull it out if there is any juice in the waves. I cant remember the full dims 6"6"x 201/2" x 21/2" issh. I scored a really nice Alkali fin for Xmas from my old chap as well, which probably helps. The plan shape is based on a Mctavish Tracker, but it has really low tucked rails modelled off a sweeet Al Byrne I have.
- steve shearer
- BUTTONMEISTER
- Posts: 45745
- Joined: Mon Oct 13, 2008 8:20 pm
Re: Single Fins
can't see those shots Tally.
Those guys at Alkali are doing sweet fins.
Those guys at Alkali are doing sweet fins.
I want Nightclub Dwight dead in his grave I want the nice-nice up in blazes
Re: Single Fins
help me out here brothers.
(i put these shots up in the modern sickness thread but dleted them from Pb after and they disappeared from that post so, up they go again here)
seeing the The rancho's fine stick with somewhat similar outline i'm hoping to restore this baby with a new spray job...
my concern is that i can't figure out if this sweet little 80's rocket - it's got 6'2 written only and i measured it as about 19 3/4 and maybe 2 7/8 ...thereabouts anyway. I can't tell if it was made with the side fins and had a box installed...or had the box and the side fins layed in later.
It was a bit banged up and I've fixed the dings and the residue around the fixed fins is evidence of that.
i've only taken it out as is and in knee to waist high. it skates a bit, but it's fast and responsive on the rail.
should i rip the fins out and put a sexy single into it?...I've got an 8" mal fin i could mount to try a three fin set up but i'm tempted to run it as a single.
??
[/URL]
[/URL]
[/URL]
(i put these shots up in the modern sickness thread but dleted them from Pb after and they disappeared from that post so, up they go again here)
seeing the The rancho's fine stick with somewhat similar outline i'm hoping to restore this baby with a new spray job...
my concern is that i can't figure out if this sweet little 80's rocket - it's got 6'2 written only and i measured it as about 19 3/4 and maybe 2 7/8 ...thereabouts anyway. I can't tell if it was made with the side fins and had a box installed...or had the box and the side fins layed in later.
It was a bit banged up and I've fixed the dings and the residue around the fixed fins is evidence of that.
i've only taken it out as is and in knee to waist high. it skates a bit, but it's fast and responsive on the rail.
should i rip the fins out and put a sexy single into it?...I've got an 8" mal fin i could mount to try a three fin set up but i'm tempted to run it as a single.
??
[/URL]
[/URL]
[/URL]
Re: Single Fins
Keep the side fins (so you can also generate your "own" speed) and throw in either a 6'5 or 7'5 centre fin.
Re: Single Fins
Yeah I'll give that a go.
So you think this was meant to be a thruster?
So you think this was meant to be a thruster?
Re: Single Fins
not sure why the photos aren't showing up maybe you can click on the link to view. I will try again another time
Re: Single Fins
Photos are fine for me.Tally wrote:not sure why the photos aren't showing up maybe you can click on the link to view. I will try again another time
Beanpole
You aren’t the room Yuke You are just a wonky cafe table with a missing rubber pad on the end of one leg.
Skipper
I still don't buy the "official" narrative about 9/11. Oh sure, it happened, fcuk yeah. But who and why and how I'm, not convinced it was what we've been told.
You aren’t the room Yuke You are just a wonky cafe table with a missing rubber pad on the end of one leg.
Skipper
I still don't buy the "official" narrative about 9/11. Oh sure, it happened, fcuk yeah. But who and why and how I'm, not convinced it was what we've been told.
Re: Single Fins
Looks like it.skipper wrote:Yeah I'll give that a go.
So you think this was meant to be a thruster?
Re: Single Fins
Looks like a Dave Parmenter Widow Maker.
Re: Single Fins
yeah a bit...it's a nic curk 'aussie assault' made for someone called rocky.
dunno if he was married.
dunno if he was married.
Who is online
Users browsing this forum: No registered users and 5 guests