Cluster Fun
Posted: Thu Nov 19, 2020 5:45 pm
Hi all,
Now that Chairman Daniels has taken the jackboot off our necks here in Victoria I can finally go surfing. During my confinement, anticipating a loss of fitness I ordered a mid length from a file I made. A key design requirement was it should have a huge turning sweet spot. I've found this fin set up delivers that so I thought I'd share. The board is 6'8" x 20 1/4" the fronts are Modii twins at 12" up, the rear is a Modii trailer 4 1/4" wide by 3 3/5" high set at 5" up.
Now that Chairman Daniels has taken the jackboot off our necks here in Victoria I can finally go surfing. During my confinement, anticipating a loss of fitness I ordered a mid length from a file I made. A key design requirement was it should have a huge turning sweet spot. I've found this fin set up delivers that so I thought I'd share. The board is 6'8" x 20 1/4" the fronts are Modii twins at 12" up, the rear is a Modii trailer 4 1/4" wide by 3 3/5" high set at 5" up.