Page 101 of 102
Re: Ebay Bargains thread
Posted: Tue Mar 12, 2024 7:52 pm
by buddy
I reckon you should have a look at quads and then run either NPJ quartet fins in it, channel islands twad fins, or twinzer fins with the bigs up front.
Reckon it would suit the feeling you're after.
Re: Ebay Bargains thread
Posted: Tue Mar 12, 2024 8:41 pm
by channels
Or just follow Yoda’s advice “Do or Do not, stop fucking overanalysing a twinnie”
Re: Ebay Bargains thread
Posted: Wed Mar 13, 2024 11:37 am
by tootr
Re: Ebay Bargains thread
Posted: Wed Mar 13, 2024 12:13 pm
by Beanpole
Looks choice…..except what’s that cratering around the dimensions. It looks weird.
Re: Ebay Bargains thread
Posted: Wed Mar 13, 2024 12:15 pm
by tootr
That would be where the guy has scraped some wax off so one may read the dimensions.
Re: Ebay Bargains thread
Posted: Wed Mar 13, 2024 12:25 pm
by Beanpole
yeah….you may be right.
I just assumed the dimensions would be on the bottom.
Re: Ebay Bargains thread
Posted: Wed Mar 13, 2024 12:36 pm
by tootr
No, the guy waxed the bottom too. The board was too fast so he wanted to slow it down.
Re: Ebay Bargains thread
Posted: Wed Mar 13, 2024 3:16 pm
by Hatchnam
channels wrote: ↑Tue Mar 12, 2024 8:41 pm
Or just follow Yoda’s advice “Do or Do not, stop fucking overanalysing a twinnie”
Yeah well twin fins are back in vogue with probably countless shapers having a crack at getting it right. Expect consumers to scratch their heads over it, ask questions, be cautious. Same as happened back in the early 2000s with the resurgence of quad fins, man there were some pig boards around that time, took years before shapers had a handle on it, mckee config or otherwise
Re: Ebay Bargains thread
Posted: Wed Mar 13, 2024 3:47 pm
by channels
Hatchnam wrote: ↑Wed Mar 13, 2024 3:16 pm
channels wrote: ↑Tue Mar 12, 2024 8:41 pm
Or just follow Yoda’s advice “Do or Do not, stop fucking overanalysing a twinnie”
Yeah well twin fins are back in vogue with probably countless shapers having a crack at getting it right. Expect consumers to scratch their heads over it, ask questions, be cautious. Same as happened back in the early 2000s with the resurgence of quad fins, man there were some pig boards around that time, took years before shapers had a handle on it, mckee config or otherwise
Just get a MR super twin then. Nailed the formula and has stuck to it.
Re: Ebay Bargains thread
Posted: Wed Mar 13, 2024 4:22 pm
by tootr
Yep can’t go wrong (if you want a twin)
Re: Ebay Bargains thread
Posted: Wed Mar 13, 2024 4:26 pm
by Drailed
Iggy is to Twins what skip is to Gaza
Re: Ebay Bargains thread
Posted: Thu Mar 14, 2024 8:04 am
by Yuke Hunt
It would appear that the Dunning-Kruger effect has moved house from the twin-fin thread to the ebay bargains thread.
Re: Ebay Bargains thread
Posted: Thu Mar 14, 2024 9:43 am
by tootr
Re: Ebay Bargains thread
Posted: Thu Mar 14, 2024 10:39 am
by Hatchnam
Thanks toots. I have seen all those. I reckon next pay check I’ll bite the bullet and just go new pyzel wildcat twin 6’2
Re: Ebay Bargains thread
Posted: Thu Mar 14, 2024 7:32 pm
by The Mighty Sunbird
Note nobody appears to be selling MR twins. Thre is a reason for this
Re: Ebay Bargains thread
Posted: Thu Mar 14, 2024 9:07 pm
by Yuke Hunt
Super Stock Mid Twin ... mid length twinny, going through the paces.
https://youtu.be/WYrq4CaPi_Q
Re: Ebay Bargains thread
Posted: Sat Mar 23, 2024 5:28 pm
by Hatchnam
Re: Ebay Bargains thread
Posted: Sat Mar 23, 2024 5:32 pm
by Hatchnam
