Converting a channel twin into a single fin

Discuss shaping and repairing techniques here.

Moderators: collnarra, PeepeelaPew, Butts, Shari

Post Reply
Johannes_rausch
newbie
Posts: 1
Joined: Thu Dec 22, 2022 6:01 am

Converting a channel twin into a single fin

Post by Johannes_rausch » Thu Dec 22, 2022 9:55 am

Hi there,

I have been surfing my first Channel Twin for a few months now. Unfortunately, the MOTE board is not available anywhere in Europe.

Because the rails are quite thick, I have the feeling that it is very hard to surf as soon as the wave doesn't have a lot of power or is huge. As soon as I push it only a little bit it loses all the drive.

It feels very chunky, and almost every turn gets out of control.
I don't consider myself a bad surfer, I've been trying to control the board for weeks now.

My idea is to put in a single fin box. This way I can either surf the board with a small trailer fin or as a single fin with side bits. Similar to the EVIL TWIN from Lost.

My current board is 6.3 (https://www.surfinestate.eu/en/collecti ... ts/arecibo).
I also tried different fins.

What do you think? Does this make any sense from a shaping point of view, or is it a waste of time?

Looking forward to an interesting conversation.
Greetings from Mexico
Jo

User avatar
Thud
Duke Status
Posts: 12540
Joined: Thu Nov 05, 2015 7:21 pm

Re: Converting a channel twin into a single fin

Post by Thud » Thu Dec 22, 2022 11:01 am

Well you’ve come to the right place for answers.
Beanpole wrote:
Thu Nov 17, 2022 7:34 pm
I grew up with Sikhs, Thudster.
Quoted from the book “A serendipitous life. Bean there, done that”

User avatar
Cranked
Duke Status
Posts: 15444
Joined: Mon Jun 16, 2014 7:52 am
Location: Willetton

Re: Converting a channel twin into a single fin

Post by Cranked » Thu Dec 22, 2022 4:04 pm

Good idea Johannes a trailer fin will give you more drive and stability. You can vary the fin size to get various different responses.
“I don’t necessarily agree with everything I say ”— Marshall McLuhan

Beanpole
That's Not Believable
Posts: 71880
Joined: Mon Apr 25, 2005 8:21 am
Location: Button Factory

Re: Converting a channel twin into a single fin

Post by Beanpole » Fri Dec 30, 2022 7:23 am

I’ve seen a lot of apparently competent surfers struggling on those type boards. Would definitely help.
Put your big boy pants on
I mean, tastebuds? WGAF?

Yuke Hunt
Duke Status
Posts: 10894
Joined: Thu Aug 28, 2008 6:31 pm
Location: Uncrowded

Re: Converting a channel twin into a single fin

Post by Yuke Hunt » Fri Dec 30, 2022 7:45 am

So old mate is in Mexico and buys boards from France ?
The moving finger writes and having writ moves on ... now all thy piety nor wit shall lure it back to cancel even half a line ... nor all thy tears wash out a single word of it.

Beanpole
That's Not Believable
Posts: 71880
Joined: Mon Apr 25, 2005 8:21 am
Location: Button Factory

Re: Converting a channel twin into a single fin

Post by Beanpole » Fri Dec 30, 2022 10:30 am

Sounds more like from Europe and happens to be in Mexico.
Put your big boy pants on
I mean, tastebuds? WGAF?

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests