New blank
Moderators: collnarra, PeepeelaPew, Butts, Shari
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
New blank
got myself a new blank, mate saw a guy throwing it out in a skip on the northern beaches, he was in brisbane this week and dropped it off for me, so Ive got plans for it. Will post pics when I start working on it (thats if theres any left on realsurf to look at em) and will glass it the same time as my sons board.
no, Im not a surfer, Im just a garbage man".
-
- Owl status
- Posts: 4517
- Joined: Thu Nov 01, 2007 1:38 pm
- Location: the white tide pole
- Contact:
Re: New blank
keep shaping, keep posting......
Re: New blank
What are ya plans? What are you going to turn to it into?
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: New blank
Im aiming at a 6'7 rounded pin, quad, will study up on mckees site for fin placement ideas and try to learn something there. Basic bottom with single concave leading into fins then possibly looking at v in tail, dont know about the vee though. Mate is going to png in a month and making him board so I can get some good feedback espically if its hollow, he is a big lad
no, Im not a surfer, Im just a garbage man".
Re: New blank
Nice. When I first started reading your post I thought you were making a gun... until I read the last line.
Can't wait to see it. Where in PNG is he headed?
Can't wait to see it. Where in PNG is he headed?
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: New blank
not sure where in png he is headed, all i know is the bastard is on a boat for two weeks, hopefully he will camp on ledges local Tonight Im going to do some measurements on the blank, thickness, rocker ect...... once Ive got all the measurements after cutting one inch of nose and tail will then see what i can do. Have to take into account thickness so I can see what sort of rocker i can get out of the blank, will then take photo of blank, transpose onto paint on the computer and do some lines to give me a better view of the rocker. Might not get what i want but will make do.
Will definately have more of a clue on what the blank can produce a little later. Normally I would say any shaper would just bin this blank but it will be great experience with the planner for me and good pratice at visualising what I can make. I will talk closely with my teacher on this one and explain my ideas and see how close to the mark I am on what I think this blank can produce.
Will definately have more of a clue on what the blank can produce a little later. Normally I would say any shaper would just bin this blank but it will be great experience with the planner for me and good pratice at visualising what I can make. I will talk closely with my teacher on this one and explain my ideas and see how close to the mark I am on what I think this blank can produce.
no, Im not a surfer, Im just a garbage man".
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: New blank
After all my measurements and trying to visulize what sort of board can come out of the blank im now thinking 6'4 rounded pin, the blank is nice and thick so im looking at carrying the thickness to the rails in a flat deck I hope.
Im really excited about this one, got a weird paint job planned for it, will be going to png on a boat trip. I might even get video coverage of it and will get real good ride reports on it. I hope it gets back in one piece so I can ride it and compare it to my more quad.
I already have 4 orders lined up, 3 for small eggs just like my boys for a few kids and a school raffle, one for a mate, might even see if I can con my missus into letting me get a blank for myself to make a sled for good old me....
Im gonna be a busy boy over the next six months and I just cant wait to hook in. I cant wait to glass, in fact im so excited I feel like a little kid in a candy shop, no room for depression for me. Life is looking up I tell ya
Im really excited about this one, got a weird paint job planned for it, will be going to png on a boat trip. I might even get video coverage of it and will get real good ride reports on it. I hope it gets back in one piece so I can ride it and compare it to my more quad.
I already have 4 orders lined up, 3 for small eggs just like my boys for a few kids and a school raffle, one for a mate, might even see if I can con my missus into letting me get a blank for myself to make a sled for good old me....
Im gonna be a busy boy over the next six months and I just cant wait to hook in. I cant wait to glass, in fact im so excited I feel like a little kid in a candy shop, no room for depression for me. Life is looking up I tell ya
no, Im not a surfer, Im just a garbage man".
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: New blank
Davros, Im thinking something very very similar, aiming at mowiing it down tommorow as much as I can, a long day ahead of me for sure.
no, Im not a surfer, Im just a garbage man".
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: New blank
Okay, thiings seem to happen for me now. Im hoping to get this blank shaped by next monday, so am going to go at it. I am glassing my sons board next monday, Im hoping to score old carpet from next door to hang form my carport to block out the uv lights, got all the glass and resign, have finally decided to book a time to just do it, will glass my sons board in just 4 oz glass and im going to glass on his fin as well, want to master this skill or at least have a crack at it, ,call me old fashioned but I prefer glass on fins. oh yeh, looking forward to the weeks work ahead, every night I will be working on it, if I can get all of the sanding completed with the power planner then do rest by hand. One thing though is I must not rush to muchl.
Most important factors is that ive got the beer ready tommorow and its cold
Most important factors is that ive got the beer ready tommorow and its cold
no, Im not a surfer, Im just a garbage man".
Re: New blank
onya diggs, good to hear you got your stoke back.
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: New blank
things slowed, havent got the template made because of kids commitments, have to get it perfect, jee have I mentioned im a perfectionists. I will be taking picks as i glass my sons board on monday
no, Im not a surfer, Im just a garbage man".
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: New blank
got the template made, beautiful shape, wont be finished for mate so slowed down to just fully enjoy it, drew out the shape on board then started cutting it out. I cut out the shape with a jig saw leaving plenty of room, about 5 ml to hand sand down to line with block and paper as I enjoy watching the shape come out with the hand sanding
Only had 9 cms to go up near the nose and I bloody sneezed Jigsaw took a right hand turn and passed the line and stuffed up the shape.
Im gonna have to redraw the shape near the nose, wanna keep the length but dont know if I will be able to, on the backburner till Ive finished my boys board but Im still laughing over the mistake. Imagine if that happened with a good blank that cost me money. I wouldnt be laughing then, think I might buy a sharp handsaw to cut out the blanks from now on
Question I got guys, who uses what to cut out their templates once you draw it onto your blank
Only had 9 cms to go up near the nose and I bloody sneezed Jigsaw took a right hand turn and passed the line and stuffed up the shape.
Im gonna have to redraw the shape near the nose, wanna keep the length but dont know if I will be able to, on the backburner till Ive finished my boys board but Im still laughing over the mistake. Imagine if that happened with a good blank that cost me money. I wouldnt be laughing then, think I might buy a sharp handsaw to cut out the blanks from now on
Question I got guys, who uses what to cut out their templates once you draw it onto your blank
no, Im not a surfer, Im just a garbage man".
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: New blank
the more I think about it, some wise man once told me to use a handsaw, think I might take that advice after the sneezing mistake
no, Im not a surfer, Im just a garbage man".
Re: New blank
Hey digger, i turned my 6' fish into a 5'8'' egg due to a planer mishap. Don't worry it'll turn out fine!.
I just use a handsaw. Thinking of using a router though, might be less finishing off. I always spend a while trueing up the outline after hand sawing. Not game to clean it up with the planer yet!.
I just use a handsaw. Thinking of using a router though, might be less finishing off. I always spend a while trueing up the outline after hand sawing. Not game to clean it up with the planer yet!.
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: New blank
Beerfan wrote:Hey digger, i turned my 6' fish into a 5'8'' egg due to a planer mishap. Don't worry it'll turn out fine!.
I just use a handsaw. Thinking of using a router though, might be less finishing off. I always spend a while trueing up the outline after hand sawing. Not game to clean it up with the planer yet!.
Hey beer fan, Im going to start using a handsaw. Neither am I game to use a planer yet to clean up to outling. I like the handsanding part anyway, find it relaxing mate
no, Im not a surfer, Im just a garbage man".
Who is online
Users browsing this forum: No registered users and 2 guests