First quad feedback
Moderators: jimmy, collnarra, PeepeelaPew, Butts, Shari, Forum Moderators
-
- Owl status
- Posts: 4517
- Joined: Thu Nov 01, 2007 1:38 pm
- Location: the white tide pole
- Contact:
Re: First quad feedback
like all boards, theres good bad, good thrusters , bad thrusters and definitely some bad quads out there....Timmy makes good boards so I know your thruster would go well, certain designs arent for everyone but dont write quads off just yet, try a few more , maybe by a shaper who rides quads alot....
might see you Aussie day....
might see you Aussie day....
Re: First quad feedback
thought mark might beat me too it
i agree, there's a lot out there. I've had 3 quads over the last 12 months, and they've all been very different.
one turned really well but didn't carry speed and was a bad paddler.
one had heaps of speed, but wouldn't turn. Good for dredging down the line stuff.
one's a keeper!
may turn out you just prefer thrusters. i'm the opposite. But then I don't really do quick direction changes...
i agree, there's a lot out there. I've had 3 quads over the last 12 months, and they've all been very different.
one turned really well but didn't carry speed and was a bad paddler.
one had heaps of speed, but wouldn't turn. Good for dredging down the line stuff.
one's a keeper!
may turn out you just prefer thrusters. i'm the opposite. But then I don't really do quick direction changes...
Re: First quad feedback
Yeah Mark, i'll try and pop along to the aussie day get together. I'll bring a few of my boards along for you to give me your impressions of and then look at some of yours.
I'm sure the quad will go really well in certain waves, in fact i can feel it in certain turns and little pumps or check turns that you do when surfing, so i am confident it will perform. I did say to the guy shaping it that i wanted it to do certain things and to that end it so far seems to fit the bill but the true test will be longer period larger waves with long walls and barrels.
Like most things, time shall tell. The quad may just eek out a space in my quiver which a thruster can't fill
I'm sure the quad will go really well in certain waves, in fact i can feel it in certain turns and little pumps or check turns that you do when surfing, so i am confident it will perform. I did say to the guy shaping it that i wanted it to do certain things and to that end it so far seems to fit the bill but the true test will be longer period larger waves with long walls and barrels.
Like most things, time shall tell. The quad may just eek out a space in my quiver which a thruster can't fill
-
- Owl status
- Posts: 4517
- Joined: Thu Nov 01, 2007 1:38 pm
- Location: the white tide pole
- Contact:
Re: First quad feedback
a slight tweak of fins can really change a quad, PM if ya wanna discuss fin options, I have done a shiteload of trials with quads and fins....
-
- Harry the Hat
- Posts: 2599
- Joined: Tue Feb 19, 2008 9:29 pm
Re: First quad feedback
Gaz, I hear what you're saying mate and I do understand, but I reckon you'll fall in love with your quad over in Indo mate. Can I ask (have I asked this before?)....is the fin setup McKee?
Oh and I have to agree with Mark...fin choice makes a fecking HUGE difference.
Oh and I have to agree with Mark...fin choice makes a fecking HUGE difference.
Re: First quad feedback
Yeah it's a McKee (spelling?) fin set up with a round tail
I've got a set of stretch quad fins in glass/corecell and another set in the grey resin stuff which I picked up as a spare from the capt.
Keen to discuss fins and even make a set if needed to tune.
So throw some ideas. Please
Ps. I hate being beaten by things so am persevering till it's right
And Tim didn't shape this board
I've got a set of stretch quad fins in glass/corecell and another set in the grey resin stuff which I picked up as a spare from the capt.
Keen to discuss fins and even make a set if needed to tune.
So throw some ideas. Please
Ps. I hate being beaten by things so am persevering till it's right
And Tim didn't shape this board
-
- Harry the Hat
- Posts: 2599
- Joined: Tue Feb 19, 2008 9:29 pm
Re: First quad feedback
Gaz....seriously talk to Mark about fins. He has experimented with so many and I was amazed at how he turned my board around after I told him what I wanted from the fins, he pointed me to a set and bam, the board now does exactly what I asked of it.
-
- Owl status
- Posts: 4517
- Joined: Thu Nov 01, 2007 1:38 pm
- Location: the white tide pole
- Contact:
Re: First quad feedback
a quad I just finished for a mate....round tail McKee QF, 6'3" x 19 1/2" x 2 9/16" ....it was almost a copy of his last one but just a litle refined, a few minor tweaks here and there...
Re: First quad feedback
Last edited by robzig on Tue Oct 18, 2016 10:07 am, edited 1 time in total.
-
- Owl status
- Posts: 4517
- Joined: Thu Nov 01, 2007 1:38 pm
- Location: the white tide pole
- Contact:
Re: First quad feedback
haha, just said similar in PM....can use anything but it isnt what most would say is a good set up....
personally havent had any joy with that set in any of my quads....of the sf4.....
personally havent had any joy with that set in any of my quads....of the sf4.....
Re: First quad feedback
Last edited by robzig on Tue Oct 18, 2016 10:07 am, edited 1 time in total.
-
- Grommet
- Posts: 82
- Joined: Wed May 09, 2007 7:14 pm
- Location: Pegs left
Re: First quad feedback
Ok you have got me worried about the Stretchs. I have a future set up with these and thought it was ok...but maybe not quite Thruster performance standard. Am I missing out on something ? Mark are you the Fin King and how do you recommend a fin for a quad setup. Thing I have found in the futures is there really just aren't any other options in Quad setups. Advice?
-
- Owl status
- Posts: 4517
- Joined: Thu Nov 01, 2007 1:38 pm
- Location: the white tide pole
- Contact:
Re: First quad feedback
not a fin king by any means.... but I do know what FCS works in my different quad designs... I use 3 different set ups with my quads ( McKee being one ) depending on what board it is....happy tp try and advise, best to send info via PM, but I have limited knowledge of the Future templates as I use FCS....
www.moresurfboards.com
www.moresurfboards.com
- Cpt.Caveman
- barnacle
- Posts: 1594
- Joined: Sun Nov 21, 2004 9:13 am
- Location: Sydney - Everywhere and nowhere.
Re: First quad feedback
I agree, fins make a huge difference in quads. I loved my Stretch set in my snub-nose MORE Kritta, it really complimented the board well...I ended up preferring it with MR's and tiny trailers in the end though...
A general rule of thumb
- want more pivot from all types of turns? Use a more upright fin, like the equivalent of the TC-Aqualine or K2.1.
- want to make it more responsive off the front foot? - Decrease the size of the front fins (e.g. M5 down to M3).
- want more pivot off the back foot? - Decrease the size of the rear fins (e.g. M3 to G1000).
In McKee quads the best fin set-ups I have used so far have been M3/G1000 and KFin/G1000 depending how loose the planshape and rocker have been designed. All time favorite in my Quadfather is KFin/G1000. Not all that different to a thruster's pivot but stacks more security and drive through hard turns.
A general rule of thumb
- want more pivot from all types of turns? Use a more upright fin, like the equivalent of the TC-Aqualine or K2.1.
- want to make it more responsive off the front foot? - Decrease the size of the front fins (e.g. M5 down to M3).
- want more pivot off the back foot? - Decrease the size of the rear fins (e.g. M3 to G1000).
In McKee quads the best fin set-ups I have used so far have been M3/G1000 and KFin/G1000 depending how loose the planshape and rocker have been designed. All time favorite in my Quadfather is KFin/G1000. Not all that different to a thruster's pivot but stacks more security and drive through hard turns.
Davros wrote:Ego saved - surfing experience rubbish.
-
- Harry the Hat
- Posts: 2599
- Joined: Tue Feb 19, 2008 9:29 pm
Re: First quad feedback
I have to agree with Captain. I use the K2.1s/G1000 combo in my QF and the ability for it to turn on a dime, but at the same time maintain speed through the turn is amazing. I found the M3/G1000 combo a little too stiff for my liking, but love the K2.1s/G1000.
I also use the C Drive fins in more sucky down the line waves (like points or reef breaks) as their ability to hold you incredibly stable so high up on the wave face is sensational and enables you to get some damn impressive down the line speed.
Gaz, more than happy to lend you any of the above fins to test ride mate. Just sing out (when we finally get some fecking swell up this way that is)!!!
I also use the C Drive fins in more sucky down the line waves (like points or reef breaks) as their ability to hold you incredibly stable so high up on the wave face is sensational and enables you to get some damn impressive down the line speed.
Gaz, more than happy to lend you any of the above fins to test ride mate. Just sing out (when we finally get some fecking swell up this way that is)!!!
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: First quad feedback
Don, I would love to test ride the c drive fins in my quad from mark, thinking they may be handy for the cyclone swells.Donweather wrote:I have to agree with Captain. I use the K2.1s/G1000 combo in my QF and the ability for it to turn on a dime, but at the same time maintain speed through the turn is amazing. I found the M3/G1000 combo a little too stiff for my liking, but love the K2.1s/G1000.
I also use the C Drive fins in more sucky down the line waves (like points or reef breaks) as their ability to hold you incredibly stable so high up on the wave face is sensational and enables you to get some damn impressive down the line speed.
Gaz, more than happy to lend you any of the above fins to test ride mate. Just sing out (when we finally get some fecking swell up this way that is)!!!
Im just using the fins mark supplied me as I found they just suited straight up but at the test ride day will be looking at fins for sure, though I do have this saying passed down to me, dont fuck with what works.
no, Im not a surfer, Im just a garbage man".
-
- Owl status
- Posts: 4517
- Joined: Thu Nov 01, 2007 1:38 pm
- Location: the white tide pole
- Contact:
Re: First quad feedback
For Digger, I'd suggest trying the KS2.1's up front , especially when surfing in small and average waves, they just add some liveliness and make those little check turns quicker and easier, but have found some surfers ( especially front foot guys who like to do more powerful carving turns and on round tails ) can find them a bit too twitchy and overly responsive for their liking....but worth a try especially on a bigger board.....there's a few other options too, I'll bring my little bag of fins along and maybe we can try a few things....( Aussie Day I mean )....
Re: First quad feedback
Cheers Donny
Have to catch up one for a wave soon anyway mate, it's been ages!
Have to catch up one for a wave soon anyway mate, it's been ages!
Who is online
Users browsing this forum: No registered users and 11 guests