Josh Dowling Designs
Moderators: jimmy, collnarra, PeepeelaPew, Butts, Shari, Forum Moderators
Re: Josh Dowling Designs
In fairness, I don't really surf big or heavy waves, so I can get away with slippy slide out of control. My first keel fish had thin fibreglass glass on sides, and a small centre fin box. The only time I used a centre fin was a small keel, maybe 2" x 1", and only when I surfed that board at a river mouth type break, which is always hollow and fast breaking. Front side it kind of robbed it of some looseness, though it provided "feedback" and a bit of precision. On the backhand in hollow waves, it really helped with "accuracy" if that makes sense?.
And for quads, as a twin fin fan, I like em close together on the rail, big in front, small in the back, single foiled both. Probably part of the reason I enjoyed the sweet potato. Basically a split keel fin, on the rail.
And for quads, as a twin fin fan, I like em close together on the rail, big in front, small in the back, single foiled both. Probably part of the reason I enjoyed the sweet potato. Basically a split keel fin, on the rail.
Re: Josh Dowling Designs
I acquired a wide tailed, what I would call more traditional planshaped, Tolhurst quad fish as a bit of a domestic traveller to comply if you will with Jetstar.
Quite a rail-based fin set-up with the board… came issued with MR fronts, M3 (centres) on the rear. No provision for a centre fin and being a Tuflite, not something easy to change.
Nice enough board but found it a bit skitterish in some circumstances so have replaced the rears with FCS Nexus - Large, which whilst being quite sizable are quite an upright fin. Problem resolved, seemingly without any compromise to maneuverability.
Quite a rail-based fin set-up with the board… came issued with MR fronts, M3 (centres) on the rear. No provision for a centre fin and being a Tuflite, not something easy to change.
Nice enough board but found it a bit skitterish in some circumstances so have replaced the rears with FCS Nexus - Large, which whilst being quite sizable are quite an upright fin. Problem resolved, seemingly without any compromise to maneuverability.
Re: Josh Dowling Designs
On another note, must say not only is the quality of JD's workmanship as good as they appear in the photos, the packaging for transport is first class.
Let me loose with a box cutter…
Let me loose with a box cutter…
Re: Josh Dowling Designs
No thoughts of a late season jaunt to really test her out Ric. "Svelte" eh - and she looks just that!!!
And practical
And practical
- PeepeelaPew
- Huey's Right Hand
- Posts: 23080
- Joined: Thu Oct 11, 2007 12:21 pm
Re: Josh Dowling Designs
...
Last edited by PeepeelaPew on Mon Nov 25, 2013 12:13 pm, edited 2 times in total.
Re: Josh Dowling Designs
Of course, J-Lo, did you sense me passing on Monday as I headed back down to Sydney? I really don't know where I reside these days.Jorgo wrote:No thoughts of a late season jaunt to really test her out Ric. "Svelte" eh - and she looks just that!!!
And practical
'Jaunt' I hear you say… of course, back to where this phase of my life commenced a year ago this October. On a silver bird Monday.
Might have to darken your doorstep next drive up to the Sunshine Coast.
Re: Josh Dowling Designs
L-mate… safe hands and unscathed, plenty of knife experience and a few scars to prove it.Legion wrote:Ric, ric! Careful! On one of mine I got too impatient and in my haste scored right through the outer skin in one spot. Scissors are much safer. Or an electric rotary cutter like my Bosch Xeo.ric_vidal wrote:On another note, must say not only is the quality of JD's workmanship as good as they appear in the photos, the packaging for transport is first class.
Let me loose with a box cutter…
- speedneedle
- charger
- Posts: 877
- Joined: Mon Apr 14, 2008 5:16 pm
- Location: Cold and lonely.
Re: Josh Dowling Designs
A certain ex-colleague of mine used to claim - "I always just wrapped them in a piece of bubble-wrap, that way the freight people could see they are fragile."
I never went with that call. Really, no really, I can't figure out why I don't trust it!
Anyway fins...If these suckers were easy to make, it'd be a day-job, but with the million plastic pop-outs available, these are the hen's teeth... JD
I never went with that call. Really, no really, I can't figure out why I don't trust it!
Anyway fins...If these suckers were easy to make, it'd be a day-job, but with the million plastic pop-outs available, these are the hen's teeth... JD
Re: Josh Dowling Designs
Composites?
Look good, strong bases too
Look good, strong bases too
- speedneedle
- charger
- Posts: 877
- Joined: Mon Apr 14, 2008 5:16 pm
- Location: Cold and lonely.
Re: Josh Dowling Designs
Composites, yes...it's a fancy way to say a combination of different materials to gain the benefits of each. Wood alone does'nt cope as a tab material, so there's solid glass inserted there.
Danny's Burning Spear - 6'9 x 20 3/4 - JD
Danny's Burning Spear - 6'9 x 20 3/4 - JD
Re: Josh Dowling Designs
Nice josh. Which is more of a pain, glass ons, or tabbed fins??. I made a few fibreglass fins. Funking annoying messy pain in the arse IMHO, but I never had the balls to try glassing fins on. Just seemed like a massive pain in the arse compared to boxes/ plugs
- speedneedle
- charger
- Posts: 877
- Joined: Mon Apr 14, 2008 5:16 pm
- Location: Cold and lonely.
Re: Josh Dowling Designs
Beery - glass-ons were all there was once. We had a choice of big or small fins. If you did'nt like it, you could grind them off and do it again yourself.Beerfan wrote:Nice josh. Which is more of a pain, glass ons, or tabbed fins??. I made a few fibreglass fins. Funking annoying messy pain in the arse IMHO, but I never had the balls to try glassing fins on. Just seemed like a massive pain in the arse compared to boxes/ plugs
Fins for glass-on are far easier to make - no need for tabs - especially for the likes of those there wooden ones - no need for a tab material insert.
Plugs and glass-on are just about the same installation wise, but plugs are way easier to sand.
Like - there you are sanding the nice bottom of a board when you come across these dirty great lump things you have to sand around.
Record I know of by a sander for most glass-on boards sanded in a day - 6.
Boards sanded with fin systems - 17. (The guy nearly died, but hey...)
Meanwhile, The Mexican, for fellow Vicco Josh - 6'4 x 19 1/2 x 2 1/2. JD
- speedneedle
- charger
- Posts: 877
- Joined: Mon Apr 14, 2008 5:16 pm
- Location: Cold and lonely.
Re: Josh Dowling Designs
It's been scientifically proven that pinstripes make a board go 56% faster! The Locomotive, for Bill in Manyana - 9'x 22...
JD
JD
Re: Josh Dowling Designs
Nice longboard josh. I can't get my head around a longboard without a "proper" centre fin. I figure it's such a big board I just stick to one fin. Personal preference I know but a smaller centre fin and side bites still feels stiff compared to a single centre fin. They' obviously work as I see a few getting around.
Been using huies 7 1/2" greenough flex in my 9'1" round pin. I thought it'd slip out but it never does. Flies but turns very well.
Been using huies 7 1/2" greenough flex in my 9'1" round pin. I thought it'd slip out but it never does. Flies but turns very well.
- speedneedle
- charger
- Posts: 877
- Joined: Mon Apr 14, 2008 5:16 pm
- Location: Cold and lonely.
Re: Josh Dowling Designs
Sydneysiders - I'll be helping give the Realsurf fundraiser a push -
Come and meet me, check out some boards.
JD
[attachment=0]bar_five.jpg[/attachmentCome and meet me, check out some boards.
JD
- speedneedle
- charger
- Posts: 877
- Joined: Mon Apr 14, 2008 5:16 pm
- Location: Cold and lonely.
Re: Josh Dowling Designs
Your approval means everything to me fong, really.fongss wrote:Nice
I did say to Don that he would'nt have had to go through any of this fundraising bizzo if he'd just charged a dollar for every smiley used.
Owen's Leviathan - 7'9 x 21 x 2 3/4 - JD
Re: Josh Dowling Designs
I like.speedneedle wrote:Owen's Leviathan - 7'9 x 21 x 2 3/4
- speedneedle
- charger
- Posts: 877
- Joined: Mon Apr 14, 2008 5:16 pm
- Location: Cold and lonely.
Re: Josh Dowling Designs
I've just been informed by Don that a serious personal drama has taken place for him, and consequently the Realsurf Fundraiser Party in DeeWhy will be postponed.
Until further notice.
JD
Until further notice.
JD
Who is online
Users browsing this forum: Google [Bot] and 5 guests