fore skins
Moderators: jimmy, collnarra, PeepeelaPew, Butts, Shari, Forum Moderators
Re: fore skins
ahhh'' fellas i have just seen this havnt been over for a while good thread
i have been puting them in boards prbly 4 yrs mainly thrusters
the new under glass instalation is nice to work very strong
mark is right the average surfer prbly dont need to be changing and fooling around
but it is the least likely to fail off all the systems they have agood selection of fins.
salty that is the one thing that we have found out that with so much pressure on the base of a keel type fin one tab is hard to deal with my son has an identical to that quad fins glassed on loves it
no lose fins either besides huie fucked those fins with weak tabs so lets kick his arse
so from know on well glass the fkers on
thanks guys its all good
cheers huie
i have been puting them in boards prbly 4 yrs mainly thrusters
the new under glass instalation is nice to work very strong
mark is right the average surfer prbly dont need to be changing and fooling around
but it is the least likely to fail off all the systems they have agood selection of fins.
salty that is the one thing that we have found out that with so much pressure on the base of a keel type fin one tab is hard to deal with my son has an identical to that quad fins glassed on loves it
no lose fins either besides huie fucked those fins with weak tabs so lets kick his arse
so from know on well glass the fkers on
thanks guys its all good
cheers huie
Last edited by huie on Sat Mar 12, 2011 10:00 am, edited 1 time in total.
-
- Owl status
- Posts: 4517
- Joined: Thu Nov 01, 2007 1:38 pm
- Location: the white tide pole
- Contact:
Re: fore skins
is it just me or is the happy Huie back ? good to have you back on the forums mate...thanks for the offer...let you know if I am keen, just got so much already goin on...and other things that I wanna get to......
Re: fore skins
Welcome back Huie.
Beanpole
You aren’t the room Yuke You are just a wonky cafe table with a missing rubber pad on the end of one leg.
Skipper
I still don't buy the "official" narrative about 9/11. Oh sure, it happened, fcuk yeah. But who and why and how I'm, not convinced it was what we've been told.
You aren’t the room Yuke You are just a wonky cafe table with a missing rubber pad on the end of one leg.
Skipper
I still don't buy the "official" narrative about 9/11. Oh sure, it happened, fcuk yeah. But who and why and how I'm, not convinced it was what we've been told.
Re: fore skins
I know Jed at Bushrat is using the 4WFS fins systems, I like his his boards and he is prepared to experiment.
I'm planning a serious venturi effect channels model which I'll get Jed to shape. Soon!
I'm planning a serious venturi effect channels model which I'll get Jed to shape. Soon!
Jaffa, I'm opinionated, and I'm sometimes right. So?
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: fore skins
Im the lazy type of surfer as i explained to mark at board testing day, i dont like to muck around to much with fins as if yourve got something that works why fix what aint broken. But I must admit this system has got me interested for sure, with the ability to change toe in, and cant, possiblities, mmmmmmmmmmm, certianly worth looking at for sure.
Looking forward to fongs feedback on his board with this fin system once he gets to try the board in decent conditions, but that wont be for a while now, cause ledge is back in town real soon
Looking forward to fongs feedback on his board with this fin system once he gets to try the board in decent conditions, but that wont be for a while now, cause ledge is back in town real soon
no, Im not a surfer, Im just a garbage man".
Re: fore skins
Huie, where do you get them from? Birthday soon, and i think i'll get the stuff needed to glass the egg. More than likely keep the egg as a single, but next board ( possibly simms ) i might use them. These sound interesting.
Re: fore skins
i can prbly sort it for you just e mail me.Beerfan wrote:Huie, where do you get them from? Birthday soon, and i think i'll get the stuff needed to glass the egg. More than likely keep the egg as a single, but next board ( possibly simms ) i might use them. These sound interesting.
these are under glass installs
cheers huie
- Cpt.Caveman
- barnacle
- Posts: 1594
- Joined: Sun Nov 21, 2004 9:13 am
- Location: Sydney - Everywhere and nowhere.
Re: fore skins
Huie, how've you been going with the flexy quad fins experiment?
I've always found extra rake on quad fins a problem, what have you been finding?
I've always found extra rake on quad fins a problem, what have you been finding?
Davros wrote:Ego saved - surfing experience rubbish.
Re: fore skins
which onesCpt.Caveman wrote:Huie, how've you been going with the flexy quad fins experiment?
I've always found extra rake on quad fins a problem, what have you been finding?
cheers huie
- Cpt.Caveman
- barnacle
- Posts: 1594
- Joined: Sun Nov 21, 2004 9:13 am
- Location: Sydney - Everywhere and nowhere.
Re: fore skins
I've never found M5's to go well in any of the quads I've owned. Similarly with M3's with the exception of the Swinger, seeing as its such a loose and pivotal rocker and planshape already the M3's work well.
Any other quad I've always found upright fins with less rake to work a lot better, such as the original KFin, SF4, MR-TFX, etc.
Hows the flexy experiment going for you?
Any other quad I've always found upright fins with less rake to work a lot better, such as the original KFin, SF4, MR-TFX, etc.
Hows the flexy experiment going for you?
Davros wrote:Ego saved - surfing experience rubbish.
Re: fore skins
fong, why'd you delete your post?
I was looking for it to quote something you said, it was beautiful stuff.
nothing in there i would have been ashamed of or regretted writing...
I was looking for it to quote something you said, it was beautiful stuff.
nothing in there i would have been ashamed of or regretted writing...
Re: fore skins
alakaboo wrote:fong, why'd you delete your post?
I was looking for it to quote something you said, it was beautiful stuff.
nothing in there i would have been ashamed of or regretted writing...
i guess some cry baby didnt like what was said
scraping the barrell i think
cheers huie
Re: fore skins
Cpt.Caveman wrote:I've never found M5's to go well in any of the quads I've owned. Similarly with M3's with the exception of the Swinger, seeing as its such a loose and pivotal rocker and planshape already the M3's work well.
Any other quad I've always found upright fins with less rake to work a lot better, such as the original KFin, SF4, MR-TFX, etc.
Hows the flexy experiment going for you?
ya want to try a set then you can tell me
cheers huie
Re: fore skins
are they the same ones i'm running Huie, or something different again?
Re: fore skins
[bnot quite but same sort of constructionalakaboo wrote:are they the same ones i'm running Huie, or something different again?
you can do any template you want as long as i dont hafta copy
anyway you got a set coming soon for rears
cheers huie
][/b]
Re: fore skins
have you heard about what FCS is coming out with? FCS II fin system will be screw-less. hopefully it works. apparently the pros have been using them in competitions. instagram "meatnpotatoes"
Who is online
Users browsing this forum: No registered users and 16 guests