A place for longboarders, eggers, fish riders... if alternative surfcraft is your game, here's the place to chat about it
Moderators: collnarra, PeepeelaPew, Butts, Shari, the kalakau kid, Forum Moderators
-
Hatchnam
- Duke Status
- Posts: 18884
- Joined: Fri Jun 18, 2010 12:44 pm
Post
by Hatchnam » Wed Dec 23, 2015 9:38 am
Davros wrote:People have been telling me for years to get a Mitchell Rae made board.
Midlengthless at the moment. But next will be a Outer Islands Mondo or a DVS All Rounder
Outer islands 7"10 midlength in immaculate condition for only $700 ((retails for over $1500))
Sydney
http://www.gumtree.com.au/s-ad/elanora- ... 1098823362
Sniff wrote: ↑Fri Feb 16, 2024 11:39 am
Not enough for a full handbeak
steve shearer wrote:full dionysian hand jive body torque
-
Davros
- Snowy McAllister
- Posts: 8578
- Joined: Fri Feb 02, 2007 3:46 pm
Post
by Davros » Wed Dec 23, 2015 9:57 am
Looks nice bar tail pad. I'm over stocked but want
-
Hatchnam
- Duke Status
- Posts: 18884
- Joined: Fri Jun 18, 2010 12:44 pm
Post
by Hatchnam » Wed Dec 23, 2015 10:06 am
It looks like it's more geared up for overhead down-the-line reef and point waves than anything. Maldives board for an older bigger bloke
Sniff wrote: ↑Fri Feb 16, 2024 11:39 am
Not enough for a full handbeak
steve shearer wrote:full dionysian hand jive body torque
-
Beerfan
Post
by Beerfan » Wed Dec 23, 2015 12:14 pm
Hatchnam wrote:It looks like it's more geared up for overhead down-the-line reef and point waves than anything. Maldives board for an older bigger bloke
If it was 1/2" wider I'd be very keen.
-
Beanpole
- That's Not Believable
- Posts: 68796
- Joined: Mon Apr 25, 2005 8:21 am
- Location: Button Factory
Post
by Beanpole » Wed Dec 23, 2015 6:35 pm
Beautiful.....but I wouldn't really go that minimalish. 7'6" max......prefer about 7'.
I ride that 7'11" size as a go to for Bondi but I wouldn't be minimaling in decent surf. I'm sure it would impress however. Ditch the tailpD straight away.
Put your big boy pants on
I mean, tastebuds? WGAF?
-
Cuttlefish
- barnacle
- Posts: 1166
- Joined: Wed Jan 23, 2008 6:06 am
- Location: Out the back of Maroochydore
Post
by Cuttlefish » Wed Dec 23, 2015 8:40 pm
Only a rat can win the rat race.
-
8
- regular
- Posts: 199
- Joined: Mon Sep 17, 2007 10:02 pm
Post
by 8 » Wed Dec 23, 2015 9:07 pm
Geez that moonraker looks and sounds similar to Maurice Cole metro with swat tail.....
Old mate heath looked a bit wobbly on it I reckon.
-
Freshiedude
- Grommet
- Posts: 57
- Joined: Thu Nov 22, 2007 10:19 am
Post
by Freshiedude » Wed Dec 23, 2015 9:31 pm
Ok I'm selling the Outer Island. The tail pad does not look that bad in the flesh! I put it on plus versatraction to protect the deck. Only selling is I have two others & need the funds. Had a few offers but a few no shows - hate that! $700 this is a steel & am now having 2nd thoughts on selling. Might offload a timber tech lost fish 6'2 instead.
-
8
- regular
- Posts: 199
- Joined: Mon Sep 17, 2007 10:02 pm
Post
by 8 » Wed Dec 23, 2015 9:44 pm
How does it go? The outer island not the lost....
-
Freshiedude
- Grommet
- Posts: 57
- Joined: Thu Nov 22, 2007 10:19 am
Post
by Freshiedude » Wed Dec 23, 2015 9:56 pm
Super fast & turns on a dime. They are so well made plus they are not machine shaped so they are a bit special me thinks. I also have a 8 & 8'6 flex tail so a 7'10 is a bit of a cross over. Works in 2ft but really comes alive 3ft plus
-
JaM71
- charger
- Posts: 751
- Joined: Thu Dec 08, 2011 11:24 pm
- Location: Gold Coast
Post
by JaM71 » Wed Dec 23, 2015 10:41 pm
Freshiedude wrote:Super fast & turns on a dime. They are so well made plus they are not machine shaped so they are a bit special me thinks. I also have a 8 & 8'6 flex tail so a 7'10 is a bit of a cross over. Works in 2ft but really comes alive 3ft plus
Nice mid length quiver freshie, care to post a gratuitous quiver shot????
Davros: "But it felt a bit long and stiff"
-
el rancho
- Duke Status
- Posts: 12544
- Joined: Wed Aug 19, 2009 11:22 am
- Location: taking a shit in the dunes
Post
by el rancho » Thu Dec 24, 2015 8:16 am
looks horrible
he's linking turns on his backhand well but why is it bobbling on every bottom turn? They're not even deep bottom turns either.
-
Beanpole
- That's Not Believable
- Posts: 68796
- Joined: Mon Apr 25, 2005 8:21 am
- Location: Button Factory
Post
by Beanpole » Thu Dec 24, 2015 8:50 am
Bobbling.......this is too advanced terminology for me.
Put your big boy pants on
I mean, tastebuds? WGAF?
-
el rancho
- Duke Status
- Posts: 12544
- Joined: Wed Aug 19, 2009 11:22 am
- Location: taking a shit in the dunes
Post
by el rancho » Thu Dec 24, 2015 9:16 am
watch the video. during bottom turns on his backhand the whole front half of the board is bouncing around. It does it nearly every time, and on the rights too you can notice it a bit.
skip to 1:03 and watch the front half of the board
-
Yuke Hunt
- Duke Status
- Posts: 10404
- Joined: Thu Aug 28, 2008 6:31 pm
- Location: Uncrowded
Post
by Yuke Hunt » Thu Dec 24, 2015 9:31 am
el rancho wrote:looks horrible
Don't you go dissing on Mitchell Rae you philistine you. He's a fcukin legend.
The moving finger writes and having writ moves on ... now all thy piety nor wit shall lure it back to cancel even half a line ... nor all thy tears wash out a single word of it.
-
el rancho
- Duke Status
- Posts: 12544
- Joined: Wed Aug 19, 2009 11:22 am
- Location: taking a shit in the dunes
Post
by el rancho » Thu Dec 24, 2015 9:36 am
Womble wrote:el rancho wrote:looks horrible
Don't you go dissing on Mitchell Rae you philistine you. He's a fcukin legend.
Yeah he makes great boards, so what?
doesn't mean that board isn't spacking out when it's put on rail.
this is what Heath says:
I think at first I was trying to drive through my turns the whole way, but then I realised I didn’t have to push as hard. When I realised to take a bit of pressure off and guide the board, I could set the rail, and it would keep its speed and it would feel amazing. I was loving it.
so it doesn't work that well doing tight turns into the pocket. it doesn't want to go vertical. It sounds like that aspect was compromised for drawn out speed lines, which is fine, whatever, but a six foot board that doesn't like a deep driving bottom turn is a little queer.
-
Cranked
- Duke Status
- Posts: 15128
- Joined: Mon Jun 16, 2014 7:52 am
- Location: Willetton
Post
by Cranked » Thu Dec 24, 2015 1:12 pm
Despite my praise I did notice it looked a bit awkward at times, but I assumed the rider may not have really dialed it in yet... plus I thought I better not attack another shibboleth after just dissing Taylor Knox riding a bonzer in the "bonzers.....the quad fad is over" thread.
“I don’t necessarily agree with everything I say ”— Marshall McLuhan
Who is online
Users browsing this forum: No registered users and 86 guests