- nineteen97.tif (63.73 KiB) Viewed 6221 times
Artwork Ideas ... PLEASE
Moderators: collnarra, PeepeelaPew, Butts, Shari
-
- regular
- Posts: 294
- Joined: Mon Jan 10, 2011 5:30 pm
Re: Artwork Ideas ... PLEASE
anything with solid colours and tape you should be right with.
i'm not much good myself but have come up with some reasonable posca pen jobs suprisignly. i'm halfway through one now and I have the feeling i might have bitten off more than i can chew!! we'll see!!
i'm not much good myself but have come up with some reasonable posca pen jobs suprisignly. i'm halfway through one now and I have the feeling i might have bitten off more than i can chew!! we'll see!!
Re: Artwork Ideas ... PLEASE
Hey Wingy, you got any kids or a girl? I had a mate who got his girl into it an she was a cracking arty girl and his board now hangs in a café. Also know that a few folks (Pridmore for instance) who get their kids to do some artwork. Personally I always challenge myself to have a go at something I've never done, it is always rewarding. There are heaps of options on youtube.
When it gets to this level of self important stupidity I lose interest.
Roy Stewart
Roy Stewart
Re: Artwork Ideas ... PLEASE
The surf decals guy posts on here as SDC. Maybe send him a pm.
Or check with fong. Pretty sure he's fb friends with him.
Or check with fong. Pretty sure he's fb friends with him.
Beanpole
You aren’t the room Yuke You are just a wonky cafe table with a missing rubber pad on the end of one leg.
Skipper
I still don't buy the "official" narrative about 9/11. Oh sure, it happened, fcuk yeah. But who and why and how I'm, not convinced it was what we've been told.
You aren’t the room Yuke You are just a wonky cafe table with a missing rubber pad on the end of one leg.
Skipper
I still don't buy the "official" narrative about 9/11. Oh sure, it happened, fcuk yeah. But who and why and how I'm, not convinced it was what we've been told.
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: Artwork Ideas ... PLEASE
Dependd how patient you arr wingnut, next artwork for me will be using paint and brush then doing some very small dot work in the shape of the maltese cross, if ideas are short hY ask the kids for inspiration
no, Im not a surfer, Im just a garbage man".
Re: Artwork Ideas ... PLEASE
Hey Wingy, you haven't got any pet signage companies around? You could have a vinyl cut done and use it as stencil.
Or as Trev said, get SDC (surfdecals) to print out with some other graphics, you are doing enough boards. I can can supply the proper file.
Or as Trev said, get SDC (surfdecals) to print out with some other graphics, you are doing enough boards. I can can supply the proper file.
Re: Artwork Ideas ... PLEASE
Depends on the size of the black area, opacity of the ink and decal as a whole…wingnut2443 wrote: I just remembered, I did not put any MEKP into a small batch of lam to go under the black probox decal ... sh1t I wonder if it has set under it ... have to check when I get home ... arghhh, she's back
All resin goes off in time even if it becomes a thick goo, if you don't believe me, leave a can open.
Slow down matey. Curing of normal resin is quite quick then plateaus for yonks.
-
- regular
- Posts: 218
- Joined: Thu May 05, 2005 7:19 pm
- Location: www.surfdecals.com
Re: Artwork Ideas ... PLEASE
If you need some help with your decals and artwork, drop us an email or check out our website.
Be stoked to help out.
Be stoked to help out.
Re: Artwork Ideas ... PLEASE
Different methodology may be called for W-Nut. Sanding is fraught with disaster, one tilt the wrong way and you are cooked.wingnut2443 wrote:Sanded the cutlap and even with the baste I STILL managed to get the foam ... arghhh ... note to self, don't fold the paper over and SLOW THE darn DOWN !
Try the Surform blade scrape followed by the edge of a Stanley blade. Or just go the blade.
-
- regular
- Posts: 294
- Joined: Mon Jan 10, 2011 5:30 pm
Re: Artwork Ideas ... PLEASE
i've found a right angle air die grinder with a 3" 3M "rotoloc" backing disc and 40grit is the best tool for smoothing the lap edges.wingnut2443 wrote:mmm ... surform I can understand, but a stanley blade?ric_vidal wrote:Different methodology may be called for W-Nut. Sanding is fraught with disaster, one tilt the wrong way and you are cooked.wingnut2443 wrote:Sanded the cutlap and even with the baste I STILL managed to get the foam ... arghhh ... note to self, don't fold the paper over and SLOW THE darn DOWN !
Try the Surform blade scrape followed by the edge of a Stanley blade. Or just go the blade.
Do you mean just the blade, to "cut" the dags and lap ... or to "scrape" the edge?
Surform to hit the high spots, can see that, but what about getting the edge down so it become invisible when filler coated and sanded?
Also, I did the filler coat on the deck without any sanding ... laminated, let it kick in the sun, the into the shed and filler coated it, then back to the sun to kick ... left it overnight and it's set really nice this morning, not tacky and quite smooth ... I painted the filler coat around the rails and onto the laps on the bottom, so hopefully the sanding process there will be a bit easier this time ...
Off to work now, so, probably give it a sand to tonight, and maybe hit the bottom with filler coat in the morning.
Re: Artwork Ideas ... PLEASE
Yes, scrape the lap with an upright new, clean of oil, Stanley blade on the VK axis as shown in Matt's diagram. Also good around the nose and tail area where glass should overlap.
Same story with the Surform blade, hand held run at an angle to the lap to get it to cut and using the VK axis. Clean the blade with an off-cut of foam first as they can be a bit rusty.
I used to use a valve grinder as per P-A but when it starts spitting oil and farking up compressors by overworking them you tend to give 'em away.
Same story with the Surform blade, hand held run at an angle to the lap to get it to cut and using the VK axis. Clean the blade with an off-cut of foam first as they can be a bit rusty.
I used to use a valve grinder as per P-A but when it starts spitting oil and farking up compressors by overworking them you tend to give 'em away.
-
- regular
- Posts: 294
- Joined: Mon Jan 10, 2011 5:30 pm
Re: Artwork Ideas ... PLEASE
i know a lot of people say to do it, but personally i dont think acetone is a good idea anywhere near a surfboard!
you could try to do a second thin hot coat, make it HOT with lots of mekp, and that should hopefully kick the stuff underneath.
you could try to do a second thin hot coat, make it HOT with lots of mekp, and that should hopefully kick the stuff underneath.
Who is online
Users browsing this forum: No registered users and 4 guests