Six channels
Moderators: jimmy, collnarra, PeepeelaPew, Butts, Shari, Forum Moderators
-
- regular
- Posts: 102
- Joined: Mon Mar 29, 2004 2:08 pm
Six channels
Hey, thinking of taking a 6'4" six channel swallow to Mentawais next year as a mid-range board.
Used to ride Al Byrne's Burning Spears six channels back in the 80s.
Looking for feedback on various options.
Have a couple of Gunter Rohn's Local Motions and see he's make a nice looking 6 channel
AB again
Or a tuflite Byrne. Never ridden a tuflite and a bit expensive, but they're light for travelling, nice shape and I assume tough.
Not sure how many out there ride 6 channels, know Nick C favours ABs, what your thoughts?
Used to ride Al Byrne's Burning Spears six channels back in the 80s.
Looking for feedback on various options.
Have a couple of Gunter Rohn's Local Motions and see he's make a nice looking 6 channel
AB again
Or a tuflite Byrne. Never ridden a tuflite and a bit expensive, but they're light for travelling, nice shape and I assume tough.
Not sure how many out there ride 6 channels, know Nick C favours ABs, what your thoughts?
- dUg
- barnacle
- Posts: 1858
- Joined: Mon Jan 19, 2004 8:22 am
- Location: sitting in my car waiting for someone else to paddle out first
Re: Six channels
Absolutely love 'em, ride them a lot. I have one of Gunther's old 6 channels in near mint condition, but the fins are a bit weird so it doesn't go as well as it should. Would be a mid-80's model I reckon.
Re: Six channels
Bloke on the boat I was just on in Indo used a 6 channel on his bigger board seemed to go pretty well for him in the bigger cleaner down the line stuff .
- speedneedle
- charger
- Posts: 877
- Joined: Mon Apr 14, 2008 5:16 pm
- Location: Cold and lonely.
Re: Six channels
Had a good period of 5 yrs obsessed with six shooters...earned my stripes as a shaper and sander with those beasts, such that it became routine.
The laminator at the time eventually stabbed an extra $50 on his price for going near the things, and that makes perfect sense. So guess why they're not wide-spread now?
Can't be beat for sheer down-the-line speed. The handful of guys who will make one are all gettin' on a bit, and the new-schoolers won't know the details, so if you want one, seek out the maestros.
Can't be done in composite...alas...
Josh
www.joshdowlingshape.com
The laminator at the time eventually stabbed an extra $50 on his price for going near the things, and that makes perfect sense. So guess why they're not wide-spread now?
Can't be beat for sheer down-the-line speed. The handful of guys who will make one are all gettin' on a bit, and the new-schoolers won't know the details, so if you want one, seek out the maestros.
Can't be done in composite...alas...
Josh
www.joshdowlingshape.com
Re: Six channels
Frocken love channels... they are fantastic in the tube and love down the line waves and carves. Only drawback I find is at high speed my attempts at cutbacks become more cut downs, I tend to find it difficult to do big direction changes on it. Getting around sections is super easy, they love to accelerate. Great design for great waves however once the wind gets up and it gets a bit choppy they tend to go pretty average... not sure why though (I'm guessing laminar flow?) but a shaper could probably explain why.
- dUg
- barnacle
- Posts: 1858
- Joined: Mon Jan 19, 2004 8:22 am
- Location: sitting in my car waiting for someone else to paddle out first
Re: Six channels
Sounds like a challenge right there Joshspeedneedle wrote:Had a good period of 5 yrs obsessed with six shooters...earned my stripes as a shaper and sander with those beasts, such that it became routine.
The laminator at the time eventually stabbed an extra $50 on his price for going near the things, and that makes perfect sense. So guess why they're not wide-spread now?
Can't be beat for sheer down-the-line speed. The handful of guys who will make one are all gettin' on a bit, and the new-schoolers won't know the details, so if you want one, seek out the maestros.
Can't be done in composite...alas...
Josh
http://www.joshdowlingshape.com
The first of my most recent two 6 channels was a right fecker to shape AND to glass, with my pro shaper mate chucking a spazz on two occasions that I actually witnessed, and several more I didn't. We eventually ended up just irrigating all the sand throughs with copious amounts of resin, because he got so sick of rocking up to work every morning seeing it there on the stand, mocking him.
With such a light glass job neither of us expected it to survive one season of floaters in the local shorey... but survive it did. Even when I snapped the first 8 inches of nose off ( the result of a shallow duckdive into the bank followed by a poorly executed air ) we stuck it back together and poured it full of Q-cell, such is my love for the board.
So now I am thinking of a 6 channel quad compsand, using revolutionary construction. If it doesn't end a crushing, expensive failure, I reckon I may well have created the fastest surfboard in the Galaxy.
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: Six channels
Love channels, alas dont have one at the moment, went for a quad cause have never tried one before, but for my next board am thinking of going back to them, am thinking of getting a nice single rounded pin with six channels, sorta like Im in my mid life crisis cause I grew up surfing singles and want to have one in my quiver for the heck of it cause there beautiful. Saw one in my local surf shop and salivated over it.........
no, Im not a surfer, Im just a garbage man".
- speedneedle
- charger
- Posts: 877
- Joined: Mon Apr 14, 2008 5:16 pm
- Location: Cold and lonely.
Re: Six channels
dUg...Fastest board in the Galaxy...I like it...
See though, it'd be madly difficult with the composite thing, trust me, I've thought about it for aaaaages...not impossible but, like, are channels reaaaaly that excellent?
How about a nice clean uncluttered dubbleconk...
I have an idea though:- add the channels as raised strips later, not clinkers. Little long, low fences in the bottom...Never know...I'll let it run through the noggin more.
Josh
www.joshdowlingshape.com
See though, it'd be madly difficult with the composite thing, trust me, I've thought about it for aaaaages...not impossible but, like, are channels reaaaaly that excellent?
How about a nice clean uncluttered dubbleconk...
I have an idea though:- add the channels as raised strips later, not clinkers. Little long, low fences in the bottom...Never know...I'll let it run through the noggin more.
Josh
www.joshdowlingshape.com
- Cpt.Caveman
- barnacle
- Posts: 1594
- Joined: Sun Nov 21, 2004 9:13 am
- Location: Sydney - Everywhere and nowhere.
Re: Six channels
A also surfed with a guy in Indo that had a 6 channel rounded pin board. He was a pretty big fella, and he said that he likes them because you can push them as hard as you want through turns. Sounded like a similar argument as for quad fins.
Davros wrote:Ego saved - surfing experience rubbish.
Re: Six channels
I took a 6'6" byrne TL channel to Ments - didnt ride it much as 604 would have been plenty of sizeFreestyler wrote:Hey, thinking of taking a 6'4" six channel swallow to Mentawais next year as a mid-range board.
Used to ride Al Byrne's Burning Spears six channels back in the 80s.
Looking for feedback on various options.
Have a couple of Gunter Rohn's Local Motions and see he's make a nice looking 6 channel
AB again
Or a tuflite Byrne. Never ridden a tuflite and a bit expensive, but they're light for travelling, nice shape and I assume tough.
Not sure how many out there ride 6 channels, know Nick C favours ABs, what your thoughts?
Pretty good board but you do not get that nice sharp edge on the channels with the Tufflite one construction that you do on an AB
Also I heard they may be discontinuing the 6 channel TL so you may find a bargain but if not I would opt for a gunther or Al byrne
Love not what you are, but what you may become
- speedneedle
- charger
- Posts: 877
- Joined: Mon Apr 14, 2008 5:16 pm
- Location: Cold and lonely.
Re: Six channels
Pulled a couple of my priceless old sweet-sixers out of the rafters today...
7'2" from 1992. This is the magic one I'm too fat for now. 6'2 from 2004...reclaimed from a sponno who has'nt had another channel bottom since, because I got into the composites and nobody else wants to do him the sixers anymore!
Josh
www.joshdowlingshape.com
7'2" from 1992. This is the magic one I'm too fat for now. 6'2 from 2004...reclaimed from a sponno who has'nt had another channel bottom since, because I got into the composites and nobody else wants to do him the sixers anymore!
Josh
www.joshdowlingshape.com
Re: Six channels
josh done many'' many'' through the eightys & had to glass them no one else would
i can see so many things in the design that could be improved on using upto date design mixed with the old.
you have my interest i might just do one
fin placement in relation to channels is what interests me
shit i never realy liked going back but i like this one.
i can see so many things in the design that could be improved on using upto date design mixed with the old.
you have my interest i might just do one
fin placement in relation to channels is what interests me
shit i never realy liked going back but i like this one.
- speedneedle
- charger
- Posts: 877
- Joined: Mon Apr 14, 2008 5:16 pm
- Location: Cold and lonely.
Re: Six channels
Hey huie,
The secret is (not that I imagine I'm telling you anything...) -
Splay each channel 2mm off from parallel with the stringer, from start-dot to rail...
Channels start inside double concave.
More tail rocker @ weeny bit of vee...
Fade the centre channel out before the tail to prevent stiffness.
Now go knock one out! Wooooooo....
Josh
www.joshdowlingshape.com
The secret is (not that I imagine I'm telling you anything...) -
Splay each channel 2mm off from parallel with the stringer, from start-dot to rail...
Channels start inside double concave.
More tail rocker @ weeny bit of vee...
Fade the centre channel out before the tail to prevent stiffness.
Now go knock one out! Wooooooo....
Josh
www.joshdowlingshape.com
- el rancho
- Duke Status
- Posts: 12544
- Joined: Wed Aug 19, 2009 11:22 am
- Location: taking a shit in the dunes
Re: Six channels
Ian Byrne is still knocking out 6 channels at Mt. Woodgee
think wayne mckewan who is shaping for bede is doin em too.
think wayne mckewan who is shaping for bede is doin em too.
- speedneedle
- charger
- Posts: 877
- Joined: Mon Apr 14, 2008 5:16 pm
- Location: Cold and lonely.
Re: Six channels
Yep,
The Mt Woodgee fellas can do 'em with their eyes closed...and have a particular Queensland style.
Josh
www.joshdowlingshape.com
The Mt Woodgee fellas can do 'em with their eyes closed...and have a particular Queensland style.
Josh
www.joshdowlingshape.com
Re: Six channels
not many people do them these days, hoyo swears by them,,, i say bring back the channel bottom
- speedneedle
- charger
- Posts: 877
- Joined: Mon Apr 14, 2008 5:16 pm
- Location: Cold and lonely.
Re: Six channels
Hey Skeg,
I announced loudly at the workshop where I do my boards that 6 channels were coming back...
The laminator and the other shaper started crying and ran out tearing their hair...
I dunno why?
Josh
www.joshdowlingshape.com
I announced loudly at the workshop where I do my boards that 6 channels were coming back...
The laminator and the other shaper started crying and ran out tearing their hair...
I dunno why?
Josh
www.joshdowlingshape.com
Re: Six channels
dunno which would be worse, shaping, laminating or sanding... but I’ll give my vote to sandingspeedneedle wrote:Hey Skeg,
I announced loudly at the workshop where I do my boards that 6 channels were coming back...
The laminator and the other shaper started crying and ran out tearing their hair...
I dunno why?
Josh
http://www.joshdowlingshape.com
Who is online
Users browsing this forum: No registered users and 112 guests