Bonzers
Moderators: collnarra, PeepeelaPew, Butts, Shari, the kalakau kid, Forum Moderators
Bonzers
Has anyone had any experience with 5 fin bonzers?
I am quite surprised with mine. It feels quite different to what I expected. Singles, twins, thrusters and quads all have a unique feeling and so does my 5 fin Bonzer. It's a totally loose drivy feeling that I really like.
It accelerates fast and smoothly, and is easy to turn. In total it has more fin area than other designs. With a lot of fin area at the back, and also forward.
The rear side fins are set at about where the front thruster/quad are but have a significantly longer base, the font sides are then even further up, with a super hard edge rail also further forward.
These effect of these design features can be felt straight away.
No one else seems to be experimenting with these long low aspect fins set well forward of the standard thruster/quad front fins.
I do have a fair bit of single fin experience. I had just one board, a 6'1 single fin, that I rode for a year in Bali in the 80s. This Bonzer is nothing like a single.
I also had two single Terry Fitz driftas (6'2 & 6'8) with a low profile 'D' shaped sides that I rode in Bali and sizable Gragagan. But these where also nothing like this Bonzer.
I am quite surprised with mine. It feels quite different to what I expected. Singles, twins, thrusters and quads all have a unique feeling and so does my 5 fin Bonzer. It's a totally loose drivy feeling that I really like.
It accelerates fast and smoothly, and is easy to turn. In total it has more fin area than other designs. With a lot of fin area at the back, and also forward.
The rear side fins are set at about where the front thruster/quad are but have a significantly longer base, the font sides are then even further up, with a super hard edge rail also further forward.
These effect of these design features can be felt straight away.
No one else seems to be experimenting with these long low aspect fins set well forward of the standard thruster/quad front fins.
I do have a fair bit of single fin experience. I had just one board, a 6'1 single fin, that I rode for a year in Bali in the 80s. This Bonzer is nothing like a single.
I also had two single Terry Fitz driftas (6'2 & 6'8) with a low profile 'D' shaped sides that I rode in Bali and sizable Gragagan. But these where also nothing like this Bonzer.
“I don’t necessarily agree with everything I say ”— Marshall McLuhan
Re: Bonzers
You trying to bait Shearer out of his lurk?
Re: Bonzers
Yes. There’s an enormous thread somewhere on this.
Re: Bonzers
Ive got some big glass twin fin keels at home, I'm gonna cut them down so they are like the Bonzer sides and try them on my Beau Young FAW
At the moment I'm using it as a 2+1 with a 7" centre and 4" sides. It's got a huge deep concave right through it
At the moment I'm using it as a 2+1 with a 7" centre and 4" sides. It's got a huge deep concave right through it
“I don’t necessarily agree with everything I say ”— Marshall McLuhan
- Cuttlefish
- barnacle
- Posts: 1166
- Joined: Wed Jan 23, 2008 6:06 am
- Location: Out the back of Maroochydore
Re: Bonzers
I'll say it now for the record. Just buy some FCS bonzer fins ($160 Aud) and don't bother cutting down fins. You want the cant of the bonzer fins.
This is coming from a fin junkie!
This is coming from a fin junkie!
Only a rat can win the rat race.
Re: Bonzers
You are correct of course. I'm just tight.
“I don’t necessarily agree with everything I say ”— Marshall McLuhan
- Cuttlefish
- barnacle
- Posts: 1166
- Joined: Wed Jan 23, 2008 6:06 am
- Location: Out the back of Maroochydore
Re: Bonzers
If you could be bothered you could make them out of old glass flex fcs fins like the M7 and M5s providing you can bend the cant into them at the tabs with heat. I've made funky mini keel sets and Stretch quad trailer fins out of them but never tried to put cant into the tabs.
Only a rat can win the rat race.
Re: Bonzers
Can't would be too difficult I reckon.
“I don’t necessarily agree with everything I say ”— Marshall McLuhan
Re: Bonzers
I’ve had two. They feel like a pepped up single fin with more bite mid face.
-
- That's Not Believable
- Posts: 68805
- Joined: Mon Apr 25, 2005 8:21 am
- Location: Button Factory
Re: Bonzers
I've got an old Carver Fish I haven't ridden for a fair while that has a double set of tabs. Apparently it wasn't designed as a quad. Rather it was done so you could choose which position you prefered as a thruster. Seems like it would handle a bonzer set up if I could get it to work with a large fcs rear. I've been thinking of doing some experimenting once the wate r warms up and I'm not wearing a steamer anymore.
Put your big boy pants on
I mean, tastebuds? WGAF?
I mean, tastebuds? WGAF?
Re: Bonzers
Have a 6’4” Mini Merk bonzer I bought from Loof. Love it, it’s a forever board. Plenty of younger guys would hate it I think as there is plenty that it can’t do but for my style of surfing it is great.
Rode one for a while in the 90’s. It was an ex pro board of Mitch Thorson and it was great. Stupidly sold it to follow the rockered out trend at the time.
Rode one for a while in the 90’s. It was an ex pro board of Mitch Thorson and it was great. Stupidly sold it to follow the rockered out trend at the time.
Re: Bonzers
I currently have 4, including a biscuit bonzer, but mine is 5'2. My favourite design by a long shot.
Hatchnam wrote:
Filthy little hipster.
Re: Bonzers
Still got a 6.2 octafish and a 7.2 egg.
They’re not leave-in-the-car boards but they’re never-to-be-sold boards.
They’re not leave-in-the-car boards but they’re never-to-be-sold boards.
Re: Bonzers
Had a 6'8" MC 5 fin egg that was ridden to bits, always wanted another one but he rarely comes over to the UK now. That board could well be a OBQ
Who is online
Users browsing this forum: No registered users and 77 guests