Page 26 of 40

Re: General snow stuff

Posted: Wed Dec 25, 2019 2:26 pm
by PeepeelaPew
...

Re: General snow stuff

Posted: Mon Jan 13, 2020 4:54 pm
by PeepeelaPew
...

Re: General snow stuff

Posted: Wed Aug 26, 2020 7:09 am
by alakaboo
alakaboo wrote:
Sun Nov 18, 2018 9:27 pm
I've decided to turn my old powder board into a splitboard.
Going to get it water jet cut, if possible.
So I actually started doing this today, but just with a hacksaw.

It's a very wide board so I'm not worried about losing a bit with the dodgy cutting.

Going to try and do it on the cheap, using part of the Voile DIY kit.
It'll be heavy and ugly but will give me an introduction.

I anticipate multiple fuckups and additions to the Blokey thread.

Re: General snow stuff

Posted: Wed Aug 26, 2020 9:40 am
by PeepeelaPew
...

Re: General snow stuff

Posted: Wed Aug 26, 2020 10:19 am
by alakaboo
The hacksaw was just to get through the metal rails.
I spent most of my time building an MDF template that bolts into the existing bindings to keep the cut straight.

Might get one of those pull saws.

Re: General snow stuff

Posted: Mon Sep 21, 2020 7:45 am
by alakaboo
After further consideration of a number of factors I've abandoned the DIY splitboard project and turned it into a snurfer instead.
Been scoping out lines in local parks.

Re: General snow stuff

Posted: Fri Oct 16, 2020 9:49 am
by alakaboo
My splitboard arrived today.
Man I'm glad I didn't keep trying to DIY.

Unfortunately my sofa is quite tasteful so I took the shots on the crappy carpet.

Image
Image

Re: General snow stuff

Posted: Fri Oct 16, 2020 10:18 am
by marauding mullet
Never heard of a split board before.
Be good when a tree jumps out in front of you.

Re: General snow stuff

Posted: Fri Oct 16, 2020 10:50 am
by Trev
marauding mullet wrote:
Fri Oct 16, 2020 10:18 am
Never heard of a split board before.
Be good when a tree jumps out in front of you.
:D 3-)

Re: General snow stuff

Posted: Fri Oct 16, 2020 11:03 am
by PeepeelaPew
...

Re: General snow stuff

Posted: Fri Oct 16, 2020 11:14 am
by offshore1
alakaboo wrote:
Fri Oct 16, 2020 9:49 am
My splitboard arrived today.
Man I'm glad I didn't keep trying to DIY.

Unfortunately my sofa is quite tasteful so I took the shots on the crappy carpet.

Image
Image
By the looks of the graffiti maple leaves, must have been made by one of tardg's Canuck kin, eh?

Re: General snow stuff

Posted: Fri Oct 16, 2020 11:21 am
by alakaboo
Legion wrote:
Fri Oct 16, 2020 11:03 am
White can be a frustrating colour for skis. Doesn't apply to boards as much though.
No, it'll be an avalanche anchor tearing my leg off at the knee.

It's from Utah, offshore, think the artist might be a Canadian guy they sponsor.

Re: General snow stuff

Posted: Fri Oct 16, 2020 11:28 am
by offshore1
Johnny Utah?



Lolz, boo. Taking the piss.

Re: General snow stuff

Posted: Fri Oct 16, 2020 4:33 pm
by channels
alakaboo wrote:
Fri Oct 16, 2020 9:49 am
My splitboard arrived today.
Man I'm glad I didn't keep trying to DIY.

Unfortunately my sofa is quite tasteful so I took the shots on the crappy carpet.

Image
Image
What’s the point of this compared to a normal snowboard?

Re: General snow stuff

Posted: Fri Oct 16, 2020 4:56 pm
by PeepeelaPew
...

Re: General snow stuff

Posted: Fri Oct 16, 2020 6:27 pm
by Trev
Legion wrote:
Fri Oct 16, 2020 4:56 pm
Enables walking up hill.
Geez.
That's what ski lifts are for.
:-)(

Re: General snow stuff

Posted: Fri Oct 16, 2020 6:36 pm
by PeepeelaPew
...

Re: General snow stuff

Posted: Fri Oct 16, 2020 11:27 pm
by alakaboo
Yeah, and walk out of flat areas back to the lift, or the car.
I've done a lot of postholing and swimming through powder.

You add skins, poles and specialised bindings.