Pridmore Fatbat 6'3

Want to trade something for something else? Or want to share a link to your you-beaut website? Post it here. This is ONLY for swaps or new website announcements*, please use our free classifieds pages for stuff you want to sell.

*Obvious, but has to be said, porn or otherwise dodgy sites posted here can get you instantly banned.

Moderators: PeepeelaPew, Butts

Post Reply
User avatar
Topher
regular
Posts: 341
Joined: Thu May 28, 2009 9:15 pm

Pridmore Fatbat 6'3

Post by Topher » Thu Mar 10, 2011 7:48 am

***Pics Added - see my post below********

** Also have an 8" Fluid Foils single fin for $30.00**
** And a FCS firewire deviant fin for $25.00 **
29/5 ** AND a Set of Medium FCS H3 Nexus Fins $100.00 **

Very very good condition, but it has had some rail dings professionally repaired.

Dims aren't on the board but it's a 6'3" x 20 5/8 x 2 1/2. Suit a bigger fella, or someone who wants amazing down the line speed and glide, but still with heaps of maneuvrability.

Will definately be getting another one, just probably a bit smaller. I've lost a bit of weight and am liking slightly smaller boards now. I'm in sydney. $275.00. Not including fins.
Last edited by Topher on Sun May 29, 2011 5:42 pm, edited 4 times in total.

powman
newbie
Posts: 2
Joined: Wed Mar 16, 2011 6:38 pm

Re: Pridmore Fatbat 6'3

Post by powman » Fri Mar 18, 2011 1:01 am

can you flick me some photo's

User avatar
Trev
Huey's Right Hand
Posts: 31016
Joined: Mon Feb 23, 2004 3:11 pm
Location: Any Point Break

Re: Pridmore Fatbat 6'3

Post by Trev » Fri Mar 18, 2011 12:23 pm

powman wrote:can you flick me some photo's
If he can't post photos I doubt he can pm them. Principle is the same (I think). You'll need to pm him your e-mail address.
Beanpole
You aren’t the room Yuke You are just a wonky cafe table with a missing rubber pad on the end of one leg.

Skipper
I still don't buy the "official" narrative about 9/11. Oh sure, it happened, fcuk yeah. But who and why and how I'm, not convinced it was what we've been told.

powman
newbie
Posts: 2
Joined: Wed Mar 16, 2011 6:38 pm

Re: Pridmore Fatbat 6'3

Post by powman » Fri Mar 18, 2011 1:35 pm

Topher, won't let me PM you, you'll need to PM me your email then i can reply

User avatar
Topher
regular
Posts: 341
Joined: Thu May 28, 2009 9:15 pm

Re: Pridmore Fatbat 6'3

Post by Topher » Fri Mar 18, 2011 5:29 pm

Cool bro I pm'd you the details. Send me a blank email and I'll shoot ya some photos later/tomorrow.

I'll try and post some photos here later anyway. Just got to pull my finger out and learn how.

User avatar
Cpt.Caveman
barnacle
Posts: 1594
Joined: Sun Nov 21, 2004 9:13 am
Location: Sydney - Everywhere and nowhere.

Re: Pridmore Fatbat 6'3

Post by Cpt.Caveman » Mon Mar 21, 2011 10:07 am

Head over to tinypic.com

Its pretty straightforward after playing around with it and posting a couple of photos. It'll even give you the source to use for forums (i.e. the one that sais [IMG]jfkdfjlskdjflksdjflksdjflksd..."). You can just copy and paste that straight into your post.
Davros wrote:Ego saved - surfing experience rubbish.

User avatar
Topher
regular
Posts: 341
Joined: Thu May 28, 2009 9:15 pm

Re: Pridmore Fatbat 6'3

Post by Topher » Tue Mar 22, 2011 8:58 am

Here's some pics. It looks pretty good now I scraped some of the old wax off. No cracks, chips or anything. Just some small heel/knee dents.
There are two patches you can just see where dings have been fixed, one on right hand side of the nose, one on the left near the fins.
Fins not included.

Image

Image

Image

Image

Image

User avatar
Topher
regular
Posts: 341
Joined: Thu May 28, 2009 9:15 pm

Re: Pridmore Fatbat 6'3

Post by Topher » Wed Mar 30, 2011 6:52 pm

No-one interested? It's in great nick.

I'd defo consider swapping for a single fin or fish.

alakaboo
Huey's Right Hand
Posts: 22658
Joined: Mon Nov 09, 2009 3:33 pm

Re: Pridmore Fatbat 6'3

Post by alakaboo » Wed Mar 30, 2011 7:50 pm

Topher wrote:I'd defo consider swapping for a single fin or fish.
Want your nugget back? :lol:

Just kidding, it's too big for me.
I'll pass it on to some bigger mates.

User avatar
Topher
regular
Posts: 341
Joined: Thu May 28, 2009 9:15 pm

Re: Pridmore Fatbat 6'3

Post by Topher » Thu Mar 31, 2011 8:11 am

Ha! Nah, the Nugget was a bit beefy for me too.

Cheers anyway. Still loving your brown wombat. Haven't used the side bites in it for months - it works so good as a single!

User avatar
Slowman
regular
Posts: 348
Joined: Mon Apr 02, 2007 4:03 pm
Location: Garie to Voodoo

Re: Pridmore Fatbat 6'3

Post by Slowman » Mon Apr 04, 2011 11:43 am

How about swapping it for a 6'1" x 19 1/4" x 2 1/2" F4 Stretch - almost the same board but smaller and less volume?

I'm also in Sydney...down south

User avatar
Topher
regular
Posts: 341
Joined: Thu May 28, 2009 9:15 pm

Re: Pridmore Fatbat 6'3

Post by Topher » Tue Apr 05, 2011 6:58 am

Thanks for the offer slowman, it's prob not what I'm after tbh. More looking for something more fishy if anything - something that surfs UNlike a shortboard.

I'm down south too, living in the shire - but usually try to surf the coal coast once a week. You are welcome to come check out the board or meet up and take it for a spin if ya want.

alakaboo
Huey's Right Hand
Posts: 22658
Joined: Mon Nov 09, 2009 3:33 pm

Re: Pridmore Fatbat 6'3

Post by alakaboo » Tue Apr 05, 2011 9:04 am

Topher wrote:Ha! Nah, the Nugget was a bit beefy for me too.

Cheers anyway. Still loving your brown wombat. Haven't used the side bites in it for months - it works so good as a single!
ah, I meant the fatbat was too big for me. But true about the nugget too. Will be selling it soon as I can get some pics together.

Yeah, that wombat is fun as a single in some decent waves. I rode it at Boneyards about 6-8 foot and it was a bit :shock: but oh so fun. Nearly kneed myself in the head the first time I turned hard, it whipped around so hard.
Tried it as a twinny yet? I only did it when i forgot my centre fin, but it was a bit of fun. With just the sidebites it's almost finless but the tail gives it a bit of grip. With some thruster sized fronts it is loose as...small waves only..

User avatar
Slowman
regular
Posts: 348
Joined: Mon Apr 02, 2007 4:03 pm
Location: Garie to Voodoo

Re: Pridmore Fatbat 6'3

Post by Slowman » Tue Apr 05, 2011 10:08 am

Topher wrote:Thanks for the offer slowman, it's prob not what I'm after tbh. More looking for something more fishy if anything - something that surfs UNlike a shortboard.

I'm down south too, living in the shire - but usually try to surf the coal coast once a week. You are welcome to come check out the board or meet up and take it for a spin if ya want.
Topher, thanks, also in the shire, would like to check it out or take it for a spin sometime. Please PM me your address and phone number.

User avatar
Topher
regular
Posts: 341
Joined: Thu May 28, 2009 9:15 pm

Re: Pridmore Fatbat 6'3 & 8" Fluid Foils Dolphin Fin

Post by Topher » Thu Apr 28, 2011 5:41 pm

Bumpus - going to eBay on sunday but prefer not simply because I can't be stuffed.

Board - $275 Now Inc Shapers Quad E Fins/

8" Fluid Foils (not FCS branded) Dolphin fin. Some rash but pretty good nick - $30.00

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests