My new project
Moderators: collnarra, PeepeelaPew, Butts, Shari
-
- Owl status
- Posts: 4517
- Joined: Thu Nov 01, 2007 1:38 pm
- Location: the white tide pole
- Contact:
Re: My new project
cool, and when you can go surfing together, thats great too, and when its on boards you guys made its just a real buzz...great stuff.......
and Quangers is still about too, good to see, hope things are all good mate ???
and Quangers is still about too, good to see, hope things are all good mate ???
Re: My new project
Great pics Digger, and great family time.
Well done.
Well done.
Beanpole
You aren’t the room Yuke You are just a wonky cafe table with a missing rubber pad on the end of one leg.
Skipper
I still don't buy the "official" narrative about 9/11. Oh sure, it happened, fcuk yeah. But who and why and how I'm, not convinced it was what we've been told.
You aren’t the room Yuke You are just a wonky cafe table with a missing rubber pad on the end of one leg.
Skipper
I still don't buy the "official" narrative about 9/11. Oh sure, it happened, fcuk yeah. But who and why and how I'm, not convinced it was what we've been told.
Re: My new project
if anyone's around moffats in the morning, can you take a small tool I'd like to hand over for digger if he wants, a tiny curved planer gizmo for shaving foam from the nose
Re: My new project
A spokeshave?
Awesome pics digger, bloody epic mate. The little tacker looks so stoked to be working with his oldman.
Awesome pics digger, bloody epic mate. The little tacker looks so stoked to be working with his oldman.
Re: My new project
Yeah, getting there mate. Cheers.pridmore wrote:cool, and when you can go surfing together, thats great too, and when its on boards you guys made its just a real buzz...great stuff.......
and Quangers is still about too, good to see, hope things are all good mate ???
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: My new project
daryl wrote:if anyone's around moffats in the morning, can you take a small tool I'd like to hand over for digger if he wants, a tiny curved planer gizmo for shaving foam from the nose
hey daz, it was awesome to meet you and have a surf mate. I hope to catch up for another surf one day, hows the board going, are you getting use to it daz
no, Im not a surfer, Im just a garbage man".
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: My new project
I had to cut down the board for noah to 17 wide due to bad cutting out on one side, so got it better and now I have to cut in the rails, am looking at doing boxy rails for him, nice and soft. Should have rails cut in by sunday.
I took out the cd player, had jimmi blasting in the background, nothing like a bit of hendrix and doing something you love, now that I finished that little task its time for a beer and to longingly look at the board for a while, just to imagine what I will do next, as fong would call it, visulization ( or however the bloody hell you spell the word)
I took out the cd player, had jimmi blasting in the background, nothing like a bit of hendrix and doing something you love, now that I finished that little task its time for a beer and to longingly look at the board for a while, just to imagine what I will do next, as fong would call it, visulization ( or however the bloody hell you spell the word)
no, Im not a surfer, Im just a garbage man".
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: My new project
going for the all nighter tonight in a attempt to get noahs board done, can use planner till about 8, finally got the rocker to close to what I want, just need to look at profile a bit closer now. Will post up pick a little later.
50/50 rails all the way around the board. soft and forgiving. Been working on it since 1 and its now 7.30. Hopefully will get rails cut in. Im very slow but each time I did a bit got the rocker stick out and did my measurements trying for perfection, but fall way short but having a hell of a lot of fun doing it.
Damn I wish I had a tin shed somewhere that was lined so the noise would not get out to much and I could just go hard at it till 12, missus is looking at me now with the evil eye saying that I cant use the planner this late at night due to neighbours kid in bed, damn it. When I get home from work tommorow. Time to sweep up.
50/50 rails all the way around the board. soft and forgiving. Been working on it since 1 and its now 7.30. Hopefully will get rails cut in. Im very slow but each time I did a bit got the rocker stick out and did my measurements trying for perfection, but fall way short but having a hell of a lot of fun doing it.
Damn I wish I had a tin shed somewhere that was lined so the noise would not get out to much and I could just go hard at it till 12, missus is looking at me now with the evil eye saying that I cant use the planner this late at night due to neighbours kid in bed, damn it. When I get home from work tommorow. Time to sweep up.
no, Im not a surfer, Im just a garbage man".
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: My new project
Thanks dan for resizing the pic for me again, here is the profile, not allowed to do any more work on it till tommorow when I get home from work
- Attachments
-
- noahs egg.jpg (29.89 KiB) Viewed 4655 times
no, Im not a surfer, Im just a garbage man".
Re: My new project
Don't lose any sleep, Digger even the machined boards are usually not symmetrical.diggerdickson wrote:measurements trying for perfection, but fall way short
'tis all about intent.
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: My new project
stuck at work and im dreaming about rails and how im gonna cut and blend em in, oh man cant even concentrate on my job, bloody dreadful disease this is, have to get home soon and get em done or this will just drive me bloody crazy...............
no, Im not a surfer, Im just a garbage man".
Re: My new project
Hey Daryl you get around since you visited me down here you covered a lot of coastline well done , all you need now is a trailer with a trampolinedaryl wrote:if anyone's around moffats in the morning, can you take a small tool I'd like to hand over for digger if he wants, a tiny curved planer gizmo for shaving foam from the nose
Jaffa, I'm opinionated, and I'm sometimes right. So?
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: My new project
The board is completed. Im loving the look of the egg, should be awesome for my boy to lie on and get the feel for a surfboard. So over the moon with this one. Tommorow there is a little bit to do on the tail, then me and Noah will get it a final sand together so he still feels part of the project and then will make some templates for flames, as my boy wants flames Will get him to spray them on the board Wenesday. Pics to follow
no, Im not a surfer, Im just a garbage man".
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: My new project
heres some pics, dan your a legend for resize and I really cant test ride before I give it to my boy. No idea when I will glass, but once sprayed I will wrap in bubble wrap until ready to glass. I must learn to be a patient man, lol.
- Attachments
-
- front on.jpg (19.43 KiB) Viewed 4511 times
-
- rail.jpg (26.2 KiB) Viewed 4510 times
-
- Nose shot rs.jpg (22.33 KiB) Viewed 4511 times
-
- nose.jpg (26.76 KiB) Viewed 4511 times
no, Im not a surfer, Im just a garbage man".
Re: My new project
^^^^It's looking good. What do you have to do to the tail?
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: My new project
Quangers wrote:^^^^It's looking good. What do you have to do to the tail?
LOL, seek perfection Thanks quangers
no, Im not a surfer, Im just a garbage man".
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: My new project
Im thinking of getting one of those digital prints that jd got on his thread for my boys board. Get a ASTRO BOY digital print for the bottom of the board, that would be so cool.
no, Im not a surfer, Im just a garbage man".
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: My new project
spray job, british green racing strips with checkers, must have checkers. Now my boy wants flames, I was going to go red, but a suggestion has been made of lighter green, mmmmm, thinking time, lol.
Thanks for the resize dan, here are the photos
Thanks for the resize dan, here are the photos
- Attachments
-
- Firstrun.jpg (34.75 KiB) Viewed 4425 times
-
- Taping.jpg (30.87 KiB) Viewed 4426 times
-
- sweet.jpg (24.33 KiB) Viewed 4425 times
-
- painted.jpg (31.39 KiB) Viewed 4426 times
-
- green taped.jpg (34.59 KiB) Viewed 4426 times
no, Im not a surfer, Im just a garbage man".
Who is online
Users browsing this forum: No registered users and 63 guests