Fastest way for a new board to cure?
Moderators: jimmy, collnarra, PeepeelaPew, Butts, beach_defender, Shari, Forum Moderators
Fastest way for a new board to cure?
In a board cover in a hot car?
Anything else?
In front of a heater?
Anything else?
In front of a heater?
- The Mighty Sunbird
- Huey's Right Hand
- Posts: 22902
- Joined: Thu May 03, 2007 12:43 pm
- Location: Pogo's
Re: Fastest way for a new board to cure?
Did that last time. Board was still in the shop. Got arrested.
Re: Fastest way for a new board to cure?
Gumby wrote:Did that last time. Board was still in the shop. Got arrested.
Cop that TMS.
Beanpole
You aren’t the room Yuke You are just a wonky cafe table with a missing rubber pad on the end of one leg.
Skipper
I still don't buy the "official" narrative about 9/11. Oh sure, it happened, fcuk yeah. But who and why and how I'm, not convinced it was what we've been told.
You aren’t the room Yuke You are just a wonky cafe table with a missing rubber pad on the end of one leg.
Skipper
I still don't buy the "official" narrative about 9/11. Oh sure, it happened, fcuk yeah. But who and why and how I'm, not convinced it was what we've been told.
- marauding mullet
- Duke Status
- Posts: 11556
- Joined: Sun Oct 20, 2013 9:13 pm
- Location: an upside down valiant
Re: Fastest way for a new board to cure?
It's a chemical reaction process, no way to accelerate it, and slower is stronger anywayGumby wrote:In a board cover in a hot car?
Anything else?
In front of a heater?
- crabmeat thompson
- Huey's Right Hand
- Posts: 26042
- Joined: Tue Jul 27, 2010 3:57 pm
- Location: good fanks
Re: Fastest way for a new board to cure?
Wrap it in aluminium foil and gently "tickle" it with an oxy from a distance of about 15-20cm.
Do this for at least 12 minutes from an analogue watch, not a digital. Digital won't cure anything.
Do this for at least 12 minutes from an analogue watch, not a digital. Digital won't cure anything.
Re: Fastest way for a new board to cure?
Won't cure anything, but it can relieve haemorrhoids
marcus wrote:and that vicco dude, whatsisname?
- marauding mullet
- Duke Status
- Posts: 11556
- Joined: Sun Oct 20, 2013 9:13 pm
- Location: an upside down valiant
Re: Fastest way for a new board to cure?
"tickle it" I quite like that expression. I think we've found Brian Westlake, who famously tickled Tiger's testicles.... haven't we THE BRIAN!!Braithy wrote:Wrap it in aluminium foil and gently "tickle" it with an oxy from a distance of about 15-20cm.
- crabmeat thompson
- Huey's Right Hand
- Posts: 26042
- Joined: Tue Jul 27, 2010 3:57 pm
- Location: good fanks
Re: Fastest way for a new board to cure?
Calm down mullet.
Re: Fastest way for a new board to cure?
To cure anything you need to firstly get a correct diagnosis, then it simply a matter of being diligent in applying the cream.
The moving finger writes and having writ moves on ... now all thy piety nor wit shall lure it back to cancel even half a line ... nor all thy tears wash out a single word of it.
- moondoggie
- regular
- Posts: 222
- Joined: Tue Feb 17, 2004 12:17 pm
- Location: Manly
Re: Fastest way for a new board to cure?
Sunlight
"I JUST SPENT 6 MONTHS BUYING LEAKY BOATS
2O MILLION BUYING BOATS
GLOBAL WARMINGS CRAP
SO BURNING 'EMS JUST ANOTHER 20 MILLION UP IN SMOKE"
Apologies to Tim Finn
2O MILLION BUYING BOATS
GLOBAL WARMINGS CRAP
SO BURNING 'EMS JUST ANOTHER 20 MILLION UP IN SMOKE"
Apologies to Tim Finn
- PeepeelaPew
- Huey's Right Hand
- Posts: 22907
- Joined: Thu Oct 11, 2007 12:21 pm
Re: Fastest way for a new board to cure?
...
Last edited by PeepeelaPew on Fri Dec 27, 2019 9:03 pm, edited 1 time in total.
-
- Huey's Right Hand
- Posts: 26515
- Joined: Tue Apr 05, 2005 9:29 am
- Location: Newport Beach
Re: Fastest way for a new board to cure?
Fascinatingly, polyester resin, once catalysed, continues to “cure” until it degrades and collapses, while epoxy resin sets and forgets.
-
- That's Not Believable
- Posts: 68730
- Joined: Mon Apr 25, 2005 8:21 am
- Location: Button Factory
Re: Fastest way for a new board to cure?
Yep....it continues to get stronger until it starts to disintegrate. That's one of the things with plastics. The "plastic"...I.e. Flexible bit is fugitive to varying degrees. It eventually leaves and the unit becomes brittle and disintegrates.
Put your big boy pants on
I mean, tastebuds? WGAF?
I mean, tastebuds? WGAF?
Re: Fastest way for a new board to cure?
Think we've had enough of button talk now, old Bean
marcus wrote:and that vicco dude, whatsisname?
-
- That's Not Believable
- Posts: 68730
- Joined: Mon Apr 25, 2005 8:21 am
- Location: Button Factory
Re: Fastest way for a new board to cure?
You don't think surfboards are made out of plastic?
Put your big boy pants on
I mean, tastebuds? WGAF?
I mean, tastebuds? WGAF?
Re: Fastest way for a new board to cure?
No, they're made of magic
marcus wrote:and that vicco dude, whatsisname?
Who is online
Users browsing this forum: No registered users and 77 guests