"More" surfboards board porn!
Moderators: jimmy, collnarra, PeepeelaPew, Butts, Shari, Forum Moderators
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: "More" surfboards board porn!
Ive had enough lard, this is a thread about marks boards and the stoke that people have riding them, if you want to bag out mark feel free to start a thread about the differences between aku shapers and shapers alone, thats if you feel that strongly about it, but not in this thread. Complain and bitch as much as you want, thats fine by me, mark didnt ask me to remove your post either before you start blaming him.
Now, carry on
Now, carry on
no, Im not a surfer, Im just a garbage man".
- Cuttlefish
- barnacle
- Posts: 1166
- Joined: Wed Jan 23, 2008 6:06 am
- Location: Out the back of Maroochydore
Re: "More" surfboards board porn!
Hi Jorgo,
Sounds interesting. I love the fish fry.
I almost went but need to stay away from events like that.
So my will was good.
I even had some "stuff" all made which could have been well received by the crew but my non-commercial side took over.
There's a few "Cuttlefish models made by other shapers...DMS (Dan McDonald shapes), DVS (Dick Van Straalen) are a couple of the local ones.
Did you take any pics?
If so can you start a thread on "Logs,eggs and alternatives"?
Sounds interesting. I love the fish fry.
I almost went but need to stay away from events like that.
So my will was good.
I even had some "stuff" all made which could have been well received by the crew but my non-commercial side took over.
There's a few "Cuttlefish models made by other shapers...DMS (Dan McDonald shapes), DVS (Dick Van Straalen) are a couple of the local ones.
Did you take any pics?
If so can you start a thread on "Logs,eggs and alternatives"?
Only a rat can win the rat race.
-
- Owl status
- Posts: 4517
- Joined: Thu Nov 01, 2007 1:38 pm
- Location: the white tide pole
- Contact:
Re: "More" surfboards board porn!
this one is off to Mexico, just wish I got to go too....6'0" x 19 1/4" x 2 1/2"
- Cuttlefish
- barnacle
- Posts: 1166
- Joined: Wed Jan 23, 2008 6:06 am
- Location: Out the back of Maroochydore
Re: "More" surfboards board porn!
The More website upgrades are good.
Only a rat can win the rat race.
- crabmeat thompson
- Huey's Right Hand
- Posts: 26042
- Joined: Tue Jul 27, 2010 3:57 pm
- Location: good fanks
Re: "More" surfboards board porn!
That's my kind of stick, MP ... I see that one's a quad. What changes would you have to make for that to be a thruster?pridmore wrote:this one is off to Mexico, just wish I got to go too....6'0" x 19 1/4" x 2 1/2"
-
- Owl status
- Posts: 4517
- Joined: Thu Nov 01, 2007 1:38 pm
- Location: the white tide pole
- Contact:
Re: "More" surfboards board porn!
the rocker, tail planshape and bottom contours are all tweaked to surf better with a quad set up, so I would just alter them a little to suit a thruster set up.....
www.moresurfboards.com
www.moresurfboards.com
Re: "More" surfboards board porn!
'tweaked', ie. I don't know but pete'll know and adjust aku accordingly, as will 'the legend' phil when he gives it to the cleaner to glass and set the plugs.......
- Cuttlefish
- barnacle
- Posts: 1166
- Joined: Wed Jan 23, 2008 6:06 am
- Location: Out the back of Maroochydore
Re: "More" surfboards board porn!
The gay Mardi gras is over again for another year but it sounds like some jealous old queen still hasn't had their fill of being bitchy.
Only a rat can win the rat race.
-
- Owl status
- Posts: 4517
- Joined: Thu Nov 01, 2007 1:38 pm
- Location: the white tide pole
- Contact:
Re: "More" surfboards board porn!
hahaha, you really have a problem, there are so many surfboard shapers using available computer technolgy and you chose to try to give me the shits, what about DHD, SA, Chilli, JS and co, they are all using the same process...dont see you havin a crack at them, but then again, its pretty brave of someone to anonymously sling shit on the net....I dont deal with anyone called Pete, so get ya facts right to begin with....most shapers have a glasser to finish off the boards, your shit slinging is lame, you throw stuff that is common place throughout the industry, ...yep, my glasser is named Phil, he does a great job and thats why I work with him, again poor effort to sling shit but it does show what kinda person you are and people can see that...go back into your little hole and maybe have a look at yourself...coz I am fine, having a great life and it'll take more than some tosser having digs to bother me....Lard Lad wrote:'tweaked', ie. I don't know but pete'll know and adjust aku accordingly, as will 'the legend' phil when he gives it to the cleaner to glass and set the plugs.......
- Cpt.Caveman
- barnacle
- Posts: 1594
- Joined: Sun Nov 21, 2004 9:13 am
- Location: Sydney - Everywhere and nowhere.
Re: "More" surfboards board porn!
Hes being a bit of a cry baby I have to admit...
What new things are cooking in your lab Mark? Any new ideas down the pipe?
What new things are cooking in your lab Mark? Any new ideas down the pipe?
Davros wrote:Ego saved - surfing experience rubbish.
Re: "More" surfboards board porn!
Lard Lad,
Consider this fair warning.
Go complain on some other thread or I'll take it further. You've contributed virtually nothing to Realsurf since you re-appeared, except to put shit on Mark.
Enough is enough
Stop now. You've done nothing but cast innuendo. If you've got some facts you're prepared to put out there and back them up with legal representation, then go ahead. But if I feel they are derogatory towards someone's living, I'll remove them.. and you.
Trev
Just to clarify this.I have no problem with someone posting a criticism of someone else on here where they have the right of reply. But it should have some credence and should only happen once. Anything more than that is harrassment, pure and simple.
Consider this fair warning.
Go complain on some other thread or I'll take it further. You've contributed virtually nothing to Realsurf since you re-appeared, except to put shit on Mark.
Enough is enough
Stop now. You've done nothing but cast innuendo. If you've got some facts you're prepared to put out there and back them up with legal representation, then go ahead. But if I feel they are derogatory towards someone's living, I'll remove them.. and you.
Trev
Just to clarify this.I have no problem with someone posting a criticism of someone else on here where they have the right of reply. But it should have some credence and should only happen once. Anything more than that is harrassment, pure and simple.
Beanpole
You aren’t the room Yuke You are just a wonky cafe table with a missing rubber pad on the end of one leg.
Skipper
I still don't buy the "official" narrative about 9/11. Oh sure, it happened, fcuk yeah. But who and why and how I'm, not convinced it was what we've been told.
You aren’t the room Yuke You are just a wonky cafe table with a missing rubber pad on the end of one leg.
Skipper
I still don't buy the "official" narrative about 9/11. Oh sure, it happened, fcuk yeah. But who and why and how I'm, not convinced it was what we've been told.
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: "More" surfboards board porn!
I didnt get on quick enough trev, thankyou
no, Im not a surfer, Im just a garbage man".
Re: "More" surfboards board porn!
Last edited by robzig on Tue Oct 18, 2016 9:35 am, edited 1 time in total.
Re: "More" surfboards board porn!
Just put a ride report (sort of) on fins and Thruster vs Quad etc regarding my Dumpling on a new thread... appreciate feedback either in here or over there.
Happiness is wanting everything you have.
-
- Owl status
- Posts: 4517
- Joined: Thu Nov 01, 2007 1:38 pm
- Location: the white tide pole
- Contact:
Re: "More" surfboards board porn!
Always got a few things in the works Captn but atm I am kinda dabbling with a few things...epoxy-eps tech, twinzers, dimples and a few other more out there things that are still at the very early stages, its moeny that holds me back from really getting into alot of different design ideas I plan on trialing so its steady as she goes and just pickin and choosing the ones I get the most stoked on at the time.....but the twinzer is something I am really enjoying playing with atm....
I know of a really good condition 'dim-SIM' for sale, its 5'6" x 21 3/4" x 2 3/4" ( need to confirm those exact dims ), its polished with a deep red tinted bottom and rails, looks good, twin keel...let me know if anyones keen....condition is 9 outta 10 and price is $490 guy liked the board but he is 60 so found the board needed a quicker pop up than his old legs wanted to do, he surfed it well once he was up but needed a slow and easy wave at take off, so he has upgraded to a 6'8" Fat-Bat....
www.moresurfboards.com
I know of a really good condition 'dim-SIM' for sale, its 5'6" x 21 3/4" x 2 3/4" ( need to confirm those exact dims ), its polished with a deep red tinted bottom and rails, looks good, twin keel...let me know if anyones keen....condition is 9 outta 10 and price is $490 guy liked the board but he is 60 so found the board needed a quicker pop up than his old legs wanted to do, he surfed it well once he was up but needed a slow and easy wave at take off, so he has upgraded to a 6'8" Fat-Bat....
www.moresurfboards.com
-
- Owl status
- Posts: 4517
- Joined: Thu Nov 01, 2007 1:38 pm
- Location: the white tide pole
- Contact:
Re: "More" surfboards board porn!
got an email from a customer who became a good buddy in 2008 in Yamba. He was from Argentina and a bloody great bloke, a bit of a free spirt who travels the world surfing and getting into alot of natural therapies and different cultures. He sent me a few pics of him surfing in Mexico on a 6'3" step-up I shaped him before he left Australia and went to Indo and beyond... I'll have more on my site soon....its great to see boards and where they go to, and the stoke they can give...
Re: "More" surfboards board porn!
you can see that? :?
-
- Owl status
- Posts: 4517
- Joined: Thu Nov 01, 2007 1:38 pm
- Location: the white tide pole
- Contact:
Re: "More" surfboards board porn!
cant see much but there was an email that came with it.....pic was much smaller than intended, bigger pics on my site soon for those who are interested.....
Who is online
Users browsing this forum: No registered users and 69 guests