First Quadfin.....feedback.
Moderators: jimmy, collnarra, PeepeelaPew, Butts, Shari, Forum Moderators
-
- Owl status
- Posts: 4517
- Joined: Thu Nov 01, 2007 1:38 pm
- Location: the white tide pole
- Contact:
Re: First Quadfin.....feedback.
definite increase here today and longer lines from the south....keep me posted on the bank, I need a change of scenery...
- speedneedle
- charger
- Posts: 877
- Joined: Mon Apr 14, 2008 5:16 pm
- Location: Cold and lonely.
Re: First Quadfin.....feedback.
Hey MP and Steve...
Nice looking board and a quality bit of feedback.
I've been wary of doing a soft round pin with a quad...like, seems to me with the whole looseness factor of quads the round outline would make for the wrong combo. Back when I was a wee little grommy in the 80's the first wave of quads were almost exclusively swallowtails.
I've shaken off the 80's phobia with confidence in Mckees stuff, absorbed the formulas, tweaked em a bit and made this one for a customer lately:-
Dimensions are 6'5" x 11 x 19 1/2" x 14 1/2" x 2 1/2"
Hopefully it goes well...
Josh
http://www.joshdowlingshape.com
Nice looking board and a quality bit of feedback.
I've been wary of doing a soft round pin with a quad...like, seems to me with the whole looseness factor of quads the round outline would make for the wrong combo. Back when I was a wee little grommy in the 80's the first wave of quads were almost exclusively swallowtails.
I've shaken off the 80's phobia with confidence in Mckees stuff, absorbed the formulas, tweaked em a bit and made this one for a customer lately:-
Dimensions are 6'5" x 11 x 19 1/2" x 14 1/2" x 2 1/2"
Hopefully it goes well...
Josh
http://www.joshdowlingshape.com
-
- Local
- Posts: 713
- Joined: Sun Mar 02, 2008 8:37 pm
Re: First Quadfin.....feedback.
MMM Id like that in 6'2 x 19 x 2 1/2 - nice looking board. I have a couple of round tail quads, they work. Plenty of drive and hold off the fins and the round tail loosens it off the top. I think you will be surprised.speedneedle wrote:Hey MP and Steve...
Nice looking board and a quality bit of feedback.
I've been wary of doing a soft round pin with a quad...like, seems to me with the whole looseness factor of quads the round outline would make for the wrong combo. Back when I was a wee little grommy in the 80's the first wave of quads were almost exclusively swallowtails.
I've shaken off the 80's phobia with confidence in Mckees stuff, absorbed the formulas, tweaked em a bit and made this one for a customer lately:-
Dimensions are 6'5" x 11 x 19 1/2" x 14 1/2" x 2 1/2"
Hopefully it goes well...
Josh
http://www.joshdowlingshape.com
-
- Local
- Posts: 713
- Joined: Sun Mar 02, 2008 8:37 pm
Re: First Quadfin.....feedback.
Actually, not sure about the rear fins. I have a step up in almost the same dims except from the quad master - Stretch. What distance between the rears?speedneedle wrote:Hey MP and Steve...
Nice looking board and a quality bit of feedback.
I've been wary of doing a soft round pin with a quad...like, seems to me with the whole looseness factor of quads the round outline would make for the wrong combo. Back when I was a wee little grommy in the 80's the first wave of quads were almost exclusively swallowtails.
I've shaken off the 80's phobia with confidence in Mckees stuff, absorbed the formulas, tweaked em a bit and made this one for a customer lately:-
Dimensions are 6'5" x 11 x 19 1/2" x 14 1/2" x 2 1/2"
Hopefully it goes well...
Josh
http://www.joshdowlingshape.com
- speedneedle
- charger
- Posts: 877
- Joined: Mon Apr 14, 2008 5:16 pm
- Location: Cold and lonely.
Re: First Quadfin.....feedback.
Hey Bohdi,
Its not straight from Mckee's this one...the back fins were closer to the rail at the customer request, a guy who has made them for himself but wanted my composite goodness, and I forgot already how far apart...
Yeah, I'm keen for the fedback on this one...
Josh
www.joshdowlingshape.com
Its not straight from Mckee's this one...the back fins were closer to the rail at the customer request, a guy who has made them for himself but wanted my composite goodness, and I forgot already how far apart...
Yeah, I'm keen for the fedback on this one...
Josh
www.joshdowlingshape.com
-
- Owl status
- Posts: 4517
- Joined: Thu Nov 01, 2007 1:38 pm
- Location: the white tide pole
- Contact:
Re: First Quadfin.....feedback.
yes, the rounded ins do work well with the quads...it is a weird thing how people think only swallows work with quads..I do diamonds, rounded pins, swallows, bats and rounded squares and they all work fine...I have done more rounded pins in the last few weeks than any other tail shape...KS influence maybe ??? not sure but I am sure they work ...been doin some rounded squares that are going great too....
- speedneedle
- charger
- Posts: 877
- Joined: Mon Apr 14, 2008 5:16 pm
- Location: Cold and lonely.
Re: First Quadfin.....feedback.
Hey MP,
Good one, I feel my lumpen ol' mind opening up.
I've had a twin which is an all-time keeper, but maybe should be a quad. It drifts in cutbacks, and its impossible on the backhand. Maybe a couple extra fins would sort it out...
Josh
www.joshdowlingshape.com
Good one, I feel my lumpen ol' mind opening up.
I've had a twin which is an all-time keeper, but maybe should be a quad. It drifts in cutbacks, and its impossible on the backhand. Maybe a couple extra fins would sort it out...
Josh
www.joshdowlingshape.com
- Cpt.Caveman
- barnacle
- Posts: 1594
- Joined: Sun Nov 21, 2004 9:13 am
- Location: Sydney - Everywhere and nowhere.
Re: First Quadfin.....feedback.
I was reading about a Bourton round-tail quad that he shaped for Troy Brooks, and hes been saying that the round-tail works really well to allow the board to pivot more, rather than to project. Something about being able to place the fins further back due to the round tail or something, I read.
http://www.basesurfboards.com/board_detail/show/id/41
http://www.basesurfboards.com/board_detail/show/id/41
Davros wrote:Ego saved - surfing experience rubbish.
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: First Quadfin.....feedback.
Ive always liked rounded tails on a board, just give it a smoother feel with my surfing, not sure if its the kelly influence or just the fact that people seem to be more willing to experiement now with all the different things going on out there, maybe not as closed minded.
no, Im not a surfer, Im just a garbage man".
-
- Owl status
- Posts: 4517
- Joined: Thu Nov 01, 2007 1:38 pm
- Location: the white tide pole
- Contact:
Re: First Quadfin.....feedback.
I hope KS' decision to ride different designs influence people to do the same but I hope people just dont ride what KS is riding.... :?
Re: First Quadfin.....feedback.
Last edited by robzig on Tue Oct 18, 2016 1:43 pm, edited 1 time in total.
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: First Quadfin.....feedback.
sheep will always be sheep pridmore, just as you are guaranteed if you are on a peak on a empty beach someone will paddle out just to sit next to you instead of finding there own peak.pridmore wrote:I hope KS' decision to ride different designs influence people to do the same but I hope people just dont ride what KS is riding.... :?
no, Im not a surfer, Im just a garbage man".
- steve shearer
- BUTTONMEISTER
- Posts: 45321
- Joined: Mon Oct 13, 2008 8:20 pm
Re: First Quadfin.....feedback.
Had another sess on the QF in overhead righthanders with plenty of bump and wobble.
Shot some video, will try and post it up tonight.
Shot some video, will try and post it up tonight.
I want Nightclub Dwight dead in his grave I want the nice-nice up in blazes
- steve shearer
- BUTTONMEISTER
- Posts: 45321
- Joined: Mon Oct 13, 2008 8:20 pm
Re: First Quadfin.....feedback.
This might seem like wank: posting videos of yourself surfing and it is.
But its great fun wank and fully open for scurrilous comment and general insolence.
Mark wanted to see how the board went and there's no amount of BS that stands up to some vid footage.
I haven't had much surf time so this is only the second go-out on the board.....it felt a bit unruly at first, like the lift generated by that curvy outline, concave and fin area was getting away from me.....but I found the sweet spot on an couple and I'm pretty sure this board is a damm keeper.
You hear so much BS on the internet about this board or that board....show me the video...I don't care if it Kelly Slater....as long as the rider has basic skills and it's being ridden in conditions for which it was designed,,,.....I wanna see the sled in action.
Anyway here's the result of an hour at Ballina this morning....the first 2 waves are my bruvva...then moi.
Bring on the judge, jury and exectioner.
http://www.vimeo.com/5123339
But its great fun wank and fully open for scurrilous comment and general insolence.
Mark wanted to see how the board went and there's no amount of BS that stands up to some vid footage.
I haven't had much surf time so this is only the second go-out on the board.....it felt a bit unruly at first, like the lift generated by that curvy outline, concave and fin area was getting away from me.....but I found the sweet spot on an couple and I'm pretty sure this board is a damm keeper.
You hear so much BS on the internet about this board or that board....show me the video...I don't care if it Kelly Slater....as long as the rider has basic skills and it's being ridden in conditions for which it was designed,,,.....I wanna see the sled in action.
Anyway here's the result of an hour at Ballina this morning....the first 2 waves are my bruvva...then moi.
Bring on the judge, jury and exectioner.
http://www.vimeo.com/5123339
I want Nightclub Dwight dead in his grave I want the nice-nice up in blazes
Re: First Quadfin.....feedback.
Nice hacks
- steve shearer
- BUTTONMEISTER
- Posts: 45321
- Joined: Mon Oct 13, 2008 8:20 pm
Re: First Quadfin.....feedback.
Huh? Bus?merkin wrote: Were you driving that bus thing of yours around today? Ballina Caltex at 1.30?
what ya talking about ?
do you mean Lennox Pub?
I want Nightclub Dwight dead in his grave I want the nice-nice up in blazes
Who is online
Users browsing this forum: Google [Bot] and 85 guests