Quiver thread

Can't find the right forum, then post your general surf-related remarks here!

Moderators: jimmy, collnarra, PeepeelaPew, Butts, beach_defender, Shari, Forum Moderators

User avatar
Cranked
Duke Status
Posts: 15064
Joined: Mon Jun 16, 2014 7:52 am
Location: Willetton

Re: Quiver thread

Post by Cranked » Sat May 13, 2017 1:37 pm

JET01 wrote:
Davros wrote:It will make such little impact if he surfs a Dominator. What a tool that man is.
What's your gripe with dominators? Not a fan?
I saw someone ripping on one in head and a half a few days ago. It was a 6'4
“I don’t necessarily agree with everything I say ”— Marshall McLuhan

surfywurfy
regular
Posts: 201
Joined: Mon Feb 14, 2011 6:41 pm

Re: Quiver thread

Post by surfywurfy » Sat May 13, 2017 2:12 pm

Cranked wrote:Just left it. Might get around to doing something: fill it with silicon?
Just some smooth tape is probably the best option,then if ya wanta put a 5th fin in you can.
And consider the resellability.

Options for a 5th are a hatchet,its low area and doesn't produce too much drag.

A few years ago KS used a quad with nubster@ Tavarua,if remember correctly it got him first place.

surfywurfy
regular
Posts: 201
Joined: Mon Feb 14, 2011 6:41 pm

Re: Quiver thread

Post by surfywurfy » Sat May 13, 2017 2:18 pm

The Mighty Sunbird wrote:
Nick Carroll wrote:the board matters, the fins have to fit the board. Once you find a set that fits the board, the combo works in whatever surf you wanna ride it in.
3 fins on beachies, 4 fins racing down the line[/quotequote

Yes.I use that too....but in very weak waves I'll use a twin.

JET01
barnacle
Posts: 1048
Joined: Tue Oct 16, 2007 4:04 pm

Re: Quiver thread

Post by JET01 » Sat May 13, 2017 2:21 pm

Davros wrote:
JET01 wrote:
Davros wrote:It will make such little impact if he surfs a Dominator. What a tool that man is.
What's your gripe with dominators? Not a fan?
Just a huge fat egg. Haven't ridden one but.
They aren't that bad really. In my opinion they are only good for int/adv surfers that can surf them as short as they can be. Good boards for back footed surfers in beachies I reckon. Getting the right size is the trick.

At 80kg+/- 3kg, I've surfed the 6'2, 6'0 and 5'10 more recently.

The 6'2 was 38L big thick rails. Paddled great, but pretty hard to do anything that resembled a sharp turn. Although skill level was low while i surfed this one. While i owned this, I demo'd a 6'0 (35L) and had a great session on it on the right hander on the long reef bombie. Always planned on the the trade in but ended up just selling the 6'2 to a mate and getting customs from PCC.

Picked up a secondhand 5'10 (33.5L) recently and had a few surfs on it as a thruster. Had a few good waves on it, but never loved it. I think I needed to stuff around with the fins a little to get it right, but as it came with futures I didn't want to spend the cash on anymore fins as everything else I have is FCS. Shortly after buying it I found a 5'11 el fuego (32L) that turned out a better fit for me, so I flicked the dominator to a Chilean backpacker.

I think for my skill and weight the 5'8 (31L) would good, but someone would practically need to give me one before i went out of my way to surf one. I love my quiver right now.

1. 9'0 longboard
2. 7'7 PCC Midlength single
3. 6'8 PCC rounded pin single fin
4. 6'8 Miller Waterskate
5. 6'2 DHD Sweet spot 2.0
6. 6'1 PCC single fin
7. 6'0 PCC thruster FCS
8. 5'11 Firewire El Fuego
9. 5'9 Twin keel fish

As soon as I get my new board from Patto, it's photo time.
Live in the sunshine, swim the sea, drink the wild air.

Beanpole
That's Not Believable
Posts: 68226
Joined: Mon Apr 25, 2005 8:21 am
Location: Button Factory

Re: Quiver thread

Post by Beanpole » Sat May 13, 2017 3:06 pm

I had one. 6'6". Half talked into it by the guy at the surf shop. I was going to Bali. Said it would go great over there and I could surf it when I got back. Annoyingly there was a 7' carver fish lurking up the back in the second hand section that was cheap cause it had Speeed fins. Having since owned the same board it would have handled Hyatt Reef and decent sized Serengan way better than the Dominator. Only really went in fat mushy waves and I had other boards that handle that better.

The only board I've owned that would consistently spin out at the bottom of a backhand take off after you've landed the drop.
Put your big boy pants on
I mean, tastebuds? WGAF?

Nick Carroll
Huey's Right Hand
Posts: 26515
Joined: Tue Apr 05, 2005 9:29 am
Location: Newport Beach

Re: Quiver thread

Post by Nick Carroll » Sat May 13, 2017 7:21 pm

buddy wrote:Totally agree.
So what about the new shiva? That's a lot of boxes for one man?
way too fcuken many.

JET01
barnacle
Posts: 1048
Joined: Tue Oct 16, 2007 4:04 pm

Re: Quiver thread

Post by JET01 » Sat May 13, 2017 7:52 pm

Beanpole wrote:I had one. 6'6". Half talked into it by the guy at the surf shop. I was going to Bali. Said it would go great over there and I could surf it when I got back. Annoyingly there was a 7' carver fish lurking up the back in the second hand section that was cheap cause it had Speeed fins. Having since owned the same board it would have handled Hyatt Reef and decent sized Serengan way better than the Dominator. Only really went in fat mushy waves and I had other boards that handle that better.

The only board I've owned that would consistently spin out at the bottom of a backhand take off after you've landed the drop.
I've got a mate that had a 6'8... I looked at the tail and thought.... "there's no way I'd even f#@k that on the quiet" ;)

With an arse like that, you need way more fin than just a set of m7's. You'd need a 9" Greenough and maybe some GL's on the side to hold that tail in.
Live in the sunshine, swim the sea, drink the wild air.

Beanpole
That's Not Believable
Posts: 68226
Joined: Mon Apr 25, 2005 8:21 am
Location: Button Factory

Re: Quiver thread

Post by Beanpole » Sun May 14, 2017 9:22 am

That's for sure. Really sharp edge on the tail going way straight and thick straight up.
Put your big boy pants on
I mean, tastebuds? WGAF?

User avatar
Cranked
Duke Status
Posts: 15064
Joined: Mon Jun 16, 2014 7:52 am
Location: Willetton

Re: Quiver thread

Post by Cranked » Sun May 14, 2017 8:45 pm

Jim Banks on fin cluster preference:
"quad, don't ride thrusters anymore... too slow..."
“I don’t necessarily agree with everything I say ”— Marshall McLuhan

User avatar
Cranked
Duke Status
Posts: 15064
Joined: Mon Jun 16, 2014 7:52 am
Location: Willetton

Re: Quiver thread

Post by Cranked » Mon May 15, 2017 6:12 am

No, they're for normal surfers, we've got a custom "Pensioner" model on file if I should need one
“I don’t necessarily agree with everything I say ”— Marshall McLuhan

User avatar
Hatchnam
Duke Status
Posts: 18789
Joined: Fri Jun 18, 2010 12:44 pm

Re: Quiver thread

Post by Hatchnam » Mon May 15, 2017 5:56 pm

saltman wrote:^^^^
You have to put it in context of the Waves jim rides
Cranked you going to pop by and snap up one of Banksy last boards
last boards? is he shutting shop? or are you talking about the "sale" at the moment, where it looks like he's doubled the price, then halved it, advertising it as a 50% off?

http://www.jimbanksurf.com/product-page/wanderer-1

was AU$2,025
now ! AU$995
Sniff wrote:
Fri Feb 16, 2024 11:39 am
Not enough for a full handbeak
steve shearer wrote:full dionysian hand jive body torque

User avatar
Cranked
Duke Status
Posts: 15064
Joined: Mon Jun 16, 2014 7:52 am
Location: Willetton

Re: Quiver thread

Post by Cranked » Mon May 15, 2017 6:03 pm

Jim was selling off his unneeded personal boards pretty cheaply
“I don’t necessarily agree with everything I say ”— Marshall McLuhan

User avatar
Cranked
Duke Status
Posts: 15064
Joined: Mon Jun 16, 2014 7:52 am
Location: Willetton

Re: Quiver thread

Post by Cranked » Mon May 15, 2017 6:07 pm

saltman wrote:I thought a 6 ish twin keel with volume +
might be a good fit
I have a 6'6 surftech soul fish. Why would I ever need anything else? :roll:
“I don’t necessarily agree with everything I say ”— Marshall McLuhan

JET01
barnacle
Posts: 1048
Joined: Tue Oct 16, 2007 4:04 pm

Re: Quiver thread

Post by JET01 » Mon May 15, 2017 7:30 pm

Cranked wrote:
saltman wrote:I thought a 6 ish twin keel with volume +
might be a good fit
I have a 6'6 surftech soul fish. Why would I ever need anything else? :roll:
Do you really? Quad setup?
Live in the sunshine, swim the sea, drink the wild air.

User avatar
Cranked
Duke Status
Posts: 15064
Joined: Mon Jun 16, 2014 7:52 am
Location: Willetton

Re: Quiver thread

Post by Cranked » Mon May 15, 2017 8:15 pm

JET01 wrote:
Cranked wrote:
saltman wrote:I thought a 6 ish twin keel with volume +
might be a good fit
I have a 6'6 surftech soul fish. Why would I ever need anything else? :roll:
Do you really? Quad setup?
No, it's just a twin with a stabilizer.

The one that is by far the best though is the USA Byrne by Michael Baron, it's a 6'6 thruster fish. Super fast, super manoeuvreable.
“I don’t necessarily agree with everything I say ”— Marshall McLuhan

Beanpole
That's Not Believable
Posts: 68226
Joined: Mon Apr 25, 2005 8:21 am
Location: Button Factory

Re: Quiver thread

Post by Beanpole » Mon May 15, 2017 8:50 pm

The 6'6" fish looks nice. I had a 6'6" fishcuit. Crazy fat......but when it went it really went. Way too flat rocker to be an everyday ride. That's when I started looking for something the same size but with more versatility.
Put your big boy pants on
I mean, tastebuds? WGAF?

User avatar
tootr
Duke Status
Posts: 14544
Joined: Tue Jun 21, 2005 9:50 am
Location: orstrayleeyah

Re: Quiver thread

Post by tootr » Tue May 16, 2017 6:28 am

OK so there seems to be a number of shapers making 4+1 boards. Surf as a quad, single, thruster, 2+1 and so forth.
On face value this sounds appealing, ie, have the one board in the travel bag/car and muck around with the fins to suit the conditions.
Anyone got one? Thoughts?

alakaboo
Huey's Right Hand
Posts: 22625
Joined: Mon Nov 09, 2009 3:33 pm

Re: Quiver thread

Post by alakaboo » Tue May 16, 2017 6:32 am

I've got a quad that was retrofitted with a box.
Pretty much only surf it as a single.

Post Reply

Who is online

Users browsing this forum: No registered users and 72 guests