Quiver thread
Moderators: jimmy, collnarra, PeepeelaPew, Butts, beach_defender, Shari, Forum Moderators
Re: Quiver thread
Tuftitties
Last edited by Davros on Thu May 04, 2017 4:56 pm, edited 2 times in total.
Re: Quiver thread
Your problem is that you're just rational, you have to learn to hate a bitHatchnam wrote:i don't hate them. i just think the disadvantages far outweigh the advantages. durability is their best attribute, performance the least. they're simply too reactive to suit a broad range of wave and surf conditions. small-mid sized lower energy wave they're ok providing it's clean conditions (no chopped or ribbed up faces) and no stiff offshore breezes or much wind at all really. in bigger conditions, they're too erratic.Cranked wrote:you and the other surftech haters are the ones with a problem, not me.
To me they are just surfboards with advantages and disadvantages just like any other surfboard, they don't embody any meaning
i've still got one, will likely sell it, and will never own another.
and i could care less about the pop-out factor or un-coolness of surftech TL boards.
“I don’t necessarily agree with everything I say ”— Marshall McLuhan
Re: Quiver thread
Crankies expression of total being is on trial here. I still believe he is the quintessential manifestion of boundless awareness, plastic surfboards or not.
Re: Quiver thread
I think Steve must have had some childhood accident or trauma, long since sublimated now, but resurfacing in recent years and somehow being inextricably linked or associated with surftechs.
“I don’t necessarily agree with everything I say ”— Marshall McLuhan
Re: Quiver thread
"Boundless awareness", I like that.Davros wrote:Crankies expression of total being is on trial here. I still believe he is the quintessential manifestion of boundless awareness, plastic surfboards or not.
I'm going to check on the progress of my zots to quads.
My good deed for the day was rescuing someone's surfboard as both it and and I were being swept down to Bingin after a 15 wave set. Took a while to spot the owner too
“I don’t necessarily agree with everything I say ”— Marshall McLuhan
- steve shearer
- BUTTONMEISTER
- Posts: 44824
- Joined: Mon Oct 13, 2008 8:20 pm
Re: Quiver thread
Hey Cranked you have created an alternative universe where dissing surfboards is equated with racism, sexism and religious discrimation.
I just think surftechs are ugly pieces of generic shit surfboards that ride like a bike with no tyres. A pretty mainstream view. Other than that view I give them no thought whatsoever.
I'd be examining your own relationship to surfboards before you point the finger at anyone else.
I just think surftechs are ugly pieces of generic shit surfboards that ride like a bike with no tyres. A pretty mainstream view. Other than that view I give them no thought whatsoever.
I'd be examining your own relationship to surfboards before you point the finger at anyone else.
I want Nightclub Dwight dead in his grave I want the nice-nice up in blazes
Re: Quiver thread
He was molested by a surftech in the Coolie toilets. Or it was Braithy. Either way, pretty traumatic.Cranked wrote:I think Steve must have had some childhood accident or trauma, long since sublimated now, but resurfacing in recent years and somehow being inextricably linked or associated with surftechs.
Re: Quiver thread
I had a tuflite billy tolhurst 9'1 longboard that was pretty sweet.
Live in the sunshine, swim the sea, drink the wild air.
Re: Quiver thread
Beautiful!steve shearer wrote: I just think surftechs are ugly pieces of generic shit surfboards that ride like a bike with no tyres. A pretty mainstream view. Other than that view I give them no thought whatsoever.
And with that I rest my case your Honour
“I don’t necessarily agree with everything I say ”— Marshall McLuhan
- steve shearer
- BUTTONMEISTER
- Posts: 44824
- Joined: Mon Oct 13, 2008 8:20 pm
Re: Quiver thread
Yes and that has no common ground with racism , sexism or religion discrimation cuzzy bro, other than in your crazy beautiful mind.
I want Nightclub Dwight dead in his grave I want the nice-nice up in blazes
-
- Huey's Right Hand
- Posts: 26515
- Joined: Tue Apr 05, 2005 9:29 am
- Location: Newport Beach
Re: Quiver thread
I don't have any driftas, I had one in 1981, a 5'8", it was good, I won an Aussie title on it hurray! But when I got a three fin a little while after that, I didn't really look back.JaM71 wrote:Tell us about your bonzer & driftas Nick, ever get the hankering to bust them out now & again or u just can't find them amongst the flower beds?
The Bonzer I have is two or three years old, made by Malcolm here in Oz, I don't ride it often, I am a huge admirer of what the Campbells did back in the early 70s with that idea, but for me anyway I think the normal thruster setup is a fair way ahead of it, less drag, more drive, and more variety available in how you set the bottom shape. Actually after riding a few 2 x1 setups recently (dominant back fin), I'm somewhat off 'em generally, they feel like thrusters with a handbrake on. I'll give up some turning reflex speed if there's a big reward somewhere else in a board but I don't feel that in a 2x1. A pure single fin is another story.
Re: Quiver thread
Nick, Terry made me two Driftas around 1983/4, a 6'4 and a 6'8. They were for a trip to Gland and I even managed to hook into the wave of the day on the biggest day.
They were both singles but with D shaped side bites (around 5" long and 3.5" high) in small traditional fin boxes (so must have been pre FCS)
Also I'm not sure of the tail. I don't remember any flyers, and I think it was a tight little square tail. Terry reckoned the 6'8 was good for anything up to 10'.
Does this sound right to you (no flyer square), or is my memory playing tricks on me?
I find the current driftas a bit ugly with the pin and the flyers and remember my two as having smooth lines and a little more area in the tail
They were both singles but with D shaped side bites (around 5" long and 3.5" high) in small traditional fin boxes (so must have been pre FCS)
Also I'm not sure of the tail. I don't remember any flyers, and I think it was a tight little square tail. Terry reckoned the 6'8 was good for anything up to 10'.
Does this sound right to you (no flyer square), or is my memory playing tricks on me?
I find the current driftas a bit ugly with the pin and the flyers and remember my two as having smooth lines and a little more area in the tail
“I don’t necessarily agree with everything I say ”— Marshall McLuhan
Re: Quiver thread
God but I have to work hard to score even a few points of you Steve.steve shearer wrote:Yes and that has no common ground with racism , sexism or religion discrimation cuzzy bro, other than in your crazy beautiful mind.
“I don’t necessarily agree with everything I say ”— Marshall McLuhan
Re: Quiver thread
Chant after me "boundless awareness, boundless awareness, boundless awareness, boundless and careless, boundless and careless, I couldn't care less, I couldn't care less..oh fk how did that happen?
-
- Huey's Right Hand
- Posts: 26515
- Joined: Tue Apr 05, 2005 9:29 am
- Location: Newport Beach
Re: Quiver thread
yeah the first Driftas were all wing swallows then TF started doing them with cut off squares which I think were better actuallyCranked wrote:Nick, Terry made me two Driftas around 1983/4, a 6'4 and a 6'8. They were for a trip to Gland and I even managed to hook into the wave of the day on the biggest day.
They were both singles but with D shaped side bites (around 5" long and 3.5" high) in small traditional fin boxes (so must have been pre FCS)
Also I'm not sure of the tail. I don't remember any flyers, and I think it was a tight little square tail. Terry reckoned the 6'8 was good for anything up to 10'.
Does this sound right to you (no flyer square), or is my memory playing tricks on me?
I find the current driftas a bit ugly with the pin and the flyers and remember my two as having smooth lines and a little more area in the tail
mine had the mini fins glassed on but a box for the centre fin. I did get a sorta evolved version of it with the cutoff square and a more relaxed single to double concave set up but then persuaded TF to make a thruster and boom!
Terry was into concave blends well before they became commonplace in classic high per thrusters, he would use them instead of the old belly channels. He made me a 5'10" wing round pin in late 1983 that was crazy ahead of its time. It had a single concave from just behind the wide point coming back to the fins. Fcuken thing absolutely flew. Won thousands of dollars on that board and eventually gave it to Newport's hottest grommet of the time, Will Edwards.
Re: Quiver thread
Thanks Nick.
So my recollection was right after all!
So my recollection was right after all!
“I don’t necessarily agree with everything I say ”— Marshall McLuhan
Re: Quiver thread
Next up for me from Terry were two Cheyne Horan type round tail singles with hard panel V in the tail and boat like roll in the front, a 5'10 and 6'2, both for Sydney beachies
Terry suggested a winged keel fin that you had been trialing but I went for Cheyne's Ben Lexen one. Both were great boards for Sydney.
Someone told me recently that it was Terry that did the board that Cheyne won Bells on.
Terry suggested a winged keel fin that you had been trialing but I went for Cheyne's Ben Lexen one. Both were great boards for Sydney.
Someone told me recently that it was Terry that did the board that Cheyne won Bells on.
“I don’t necessarily agree with everything I say ”— Marshall McLuhan
-
- Huey's Right Hand
- Posts: 26515
- Joined: Tue Apr 05, 2005 9:29 am
- Location: Newport Beach
Re: Quiver thread
Yeah! But tuflite still sucks.Cranked wrote:So my recollection was right after all!
Who is online
Users browsing this forum: Bing [Bot] and 65 guests