Quiver thread
Moderators: jimmy, collnarra, PeepeelaPew, Butts, beach_defender, Shari, Forum Moderators
Re: Quiver thread
All boards and fins by Huie.
In order of wave size, smallest to largest:
6'6"X 21 7/16" X 2 3/8" double ender. Late 60s template, modern contours. Originally a quad, had the box retrofitted and prefer it as a single. Up to 3 foot fat windswell/Moffats.
5'6" x 20 3/8" x 2 1/2" skateboardy sort of thing, 5 plugs. Peaky low-tide windswell up to 4ft, Fast small pointbreaks.
Only ridden it as a quad, fun as hell.
5'10" x 19 1/2 ish x 2 5/8" ish, quad. Some funny contours going on in the tail, based off yacht design. Means that it doesn't get flighty at high speed despite the wide tail. Sydney beachbreaks up to double overhead with a change of fins.
First board I got from Huie, absolute magic carpet. The one I'd grab if there was a fire.
6'0" x 19" x 2 5/8" I think, thruster. My regular board these days for pointbreaks and beachbreaks from 2-5ft, beefed up a bit for the transition to weekend warrior status. Every time I ride it I like it more.
6'4" x 19 1/2 ish x 2 3/4 ish". 2+1 but I ride it almost exclusively as a single these days. Bigger pointbreak board or for when I need to cover a lot of ground or counter a sweep. Early entry, slices like a scalpel. Quite refined in the tail and stiff from Innegra, got a cork deck on it now to add a bit of weight.
Yes I could get by with just a couple of them, but why?
Not shown:
14ft surf ski.
10'4" SUP for fishing.
Wife's 7'4" mini-mal.
Couple of boats. Couple of kayaks.
Few beaters that live under various houses for travelling.
In order of wave size, smallest to largest:
6'6"X 21 7/16" X 2 3/8" double ender. Late 60s template, modern contours. Originally a quad, had the box retrofitted and prefer it as a single. Up to 3 foot fat windswell/Moffats.
5'6" x 20 3/8" x 2 1/2" skateboardy sort of thing, 5 plugs. Peaky low-tide windswell up to 4ft, Fast small pointbreaks.
Only ridden it as a quad, fun as hell.
5'10" x 19 1/2 ish x 2 5/8" ish, quad. Some funny contours going on in the tail, based off yacht design. Means that it doesn't get flighty at high speed despite the wide tail. Sydney beachbreaks up to double overhead with a change of fins.
First board I got from Huie, absolute magic carpet. The one I'd grab if there was a fire.
6'0" x 19" x 2 5/8" I think, thruster. My regular board these days for pointbreaks and beachbreaks from 2-5ft, beefed up a bit for the transition to weekend warrior status. Every time I ride it I like it more.
6'4" x 19 1/2 ish x 2 3/4 ish". 2+1 but I ride it almost exclusively as a single these days. Bigger pointbreak board or for when I need to cover a lot of ground or counter a sweep. Early entry, slices like a scalpel. Quite refined in the tail and stiff from Innegra, got a cork deck on it now to add a bit of weight.
Yes I could get by with just a couple of them, but why?
Not shown:
14ft surf ski.
10'4" SUP for fishing.
Wife's 7'4" mini-mal.
Couple of boats. Couple of kayaks.
Few beaters that live under various houses for travelling.
Re: Quiver thread
5'10 sexy as hell
Re: Quiver thread
5'0 Rake stringerles magic peanut (quad simmons)
5'3 NPJ squail
5'6 Gary McNeill CV2
5'6 CB BB (5 fin)
5'6 CB MLV (3 fin)
6'0 NPJ 2+1
6'3 CB Russ Short pintail (5 fin)
6'6 Cooper Hull
9'4 Warhurst log
5'3 NPJ squail
5'6 Gary McNeill CV2
5'6 CB BB (5 fin)
5'6 CB MLV (3 fin)
6'0 NPJ 2+1
6'3 CB Russ Short pintail (5 fin)
6'6 Cooper Hull
9'4 Warhurst log
Hatchnam wrote:
Filthy little hipster.
Re: Quiver thread
6'1 PCC 1970's round rail single (wedding present from the wife - only surf it in uncrowded waves as I'm shit scared to ding it)
6'2 Miller waterskate (best board I've owned as a day driver)
6'2 Campbell Brothers 5 fin Mini Merk (being shaped as we speak for the good days)
6'8 Miller Waterskate ( don't surf it much anymore. Can't get rid of my first custom! Cruisey alrounder. Had it in 1ft beaches and 6ft boneyards. Would love a 6'6-6'8 bonzer5 egg to replace this.
7'7 PCC single fin midlength - this board inspired a new thread. Bought in honour of the birth of my first child. Classic versatile shape.
9'6 ECS triple stringer log. Only surf if when its one foot or mega crowded. It's a piece of shit, I hate it, would be great for crescent or Byron, not Sydney beaches. If anyone wants to swap it for an 8'6-9'0 worth $350 get in touch.
Pics will come when the bonzer is ready.
6'2 Miller waterskate (best board I've owned as a day driver)
6'2 Campbell Brothers 5 fin Mini Merk (being shaped as we speak for the good days)
6'8 Miller Waterskate ( don't surf it much anymore. Can't get rid of my first custom! Cruisey alrounder. Had it in 1ft beaches and 6ft boneyards. Would love a 6'6-6'8 bonzer5 egg to replace this.
7'7 PCC single fin midlength - this board inspired a new thread. Bought in honour of the birth of my first child. Classic versatile shape.
9'6 ECS triple stringer log. Only surf if when its one foot or mega crowded. It's a piece of shit, I hate it, would be great for crescent or Byron, not Sydney beaches. If anyone wants to swap it for an 8'6-9'0 worth $350 get in touch.
Pics will come when the bonzer is ready.
Live in the sunshine, swim the sea, drink the wild air.
Re: Quiver thread
Haven't measured it, but McKee-like if not the full deal. I think a touch wider spread on the rear fins?
Those fins are the really lightweight super stiff summer slop fins. Carbon fibre and silky oak I think.
Those fins are the really lightweight super stiff summer slop fins. Carbon fibre and silky oak I think.
Re: Quiver thread
Nah, more rail centric and normally run with a bit more fin area. Although in summer I'm going to try out a bunch of fin sets.
- black duck
- Snowy McAllister
- Posts: 5099
- Joined: Wed Feb 25, 2009 10:47 am
Re: Quiver thread
My quiver consists of boards i've finished with but are still in ok nick, some of them a bit yellowed and a few dings but still ok to ride, although i don't ride them and can't bring myself to ride them, so i get a new one, thinking.... this will be the one.... and it is..... until the next one, so I'm left with a bunch of boards in the garage that i almost never ride. Thats my quiver.
Re: Quiver thread
7'6 mini mal - for tiny gutless conditions, or for when I want coverage and drawn out turns on overhead long flatter faced waves.
7'2 outer islands gun - for reefs at 6 to 8 foot and bigger. Use it a handful of times each year.
6'11 single fin - used mostly at 6 foot plus high energy down the line type surf. Goes great out at wanda thru greenhills, high-lining freight train rights on the big winter south swells.
6'4 thruster - clean conditions, little or no winds, 2 to 6 foot and bowly.
6'3 eighties belly channel thruster - anything from 4 to 6 foot and a bit bigger.
6'0 single - for 2 to 4 foot, well shaped with a nice long wall on it.
6'0 twin - for peaky wind swells up to a little overhead
And the 8'0 gun up front, for when it's massive with water moving everywhere, for early entry, hold, bite, and rail drive. Use it maybe once or twice a year.
Re: Quiver thread
Who cares what it cost Iggy, who cares if it cost $1000 or $20000 - do you get some kind of bragging rights for spending a lot or a little ? Who gives a shit.
Trev wrote:I have always had a lot of time for Dick
smnmntll wrote:Got one in the mouth once, that was pretty memorable
Re: Quiver thread
Drailed wrote:Who cares what it cost Iggy, who cares if it cost $1000 or $20000 - do you get some kind of bragging rights for spending a lot or a little ? Who gives a shit.
I knew that'd catch me a Loofy
- el rancho
- Duke Status
- Posts: 12544
- Joined: Wed Aug 19, 2009 11:22 am
- Location: taking a shit in the dunes
Re: Quiver thread
Nothing worse than some pecker in the lineup who can barely bottom turn talking about the performance aspects of their brand new surfboard.
Die.
Die.
Re: Quiver thread
Looks like the board selection your local Cash Converters.Hatchnam wrote:
Re: Quiver thread
They all go. And they all go good for me. That's what matters. The rest is just window dressing, fluff and glitter.
Re: Quiver thread
Unfortunately any retro coolness contained within that quiver is cancelled out by the surftech.Hatchnam wrote:
7'6 mini mal - for tiny gutless conditions, or for when I want coverage and drawn out turns on overhead long flatter faced waves.
7'2 outer islands gun - for reefs at 6 to 8 foot and bigger. Use it a handful of times each year.
6'11 single fin - used mostly at 6 foot plus high energy down the line type surf. Goes great out at wanda thru greenhills, high-lining freight train rights on the big winter south swells.
6'4 thruster - clean conditions, little or no winds, 2 to 6 foot and bowly.
6'3 eighties belly channel thruster - anything from 4 to 6 foot and a bit bigger.
6'0 single - for 2 to 4 foot, well shaped with a nice long wall on it.
6'0 twin - for peaky wind swells up to a little overhead
And the 8'0 gun up front, for when it's massive with water moving everywhere, for early entry, hold, bite, and rail drive. Use it maybe once or twice a year.
Re: Quiver thread
Deus Twin?
Re: Quiver thread
Lol. Haha. The Tuflite was a once off. And will remain that way. At the time, I bought it very cheap. And was only motivated to do so by other hi-perf boards that were falling apart at the time.
I don't regret buying it. But would avoid Tuflite in future. Super fast, minimal flex, with a stiff driving recoil kinda feel to it. But you must have clean waves. Wind blows it all over the place, and with layered or lumpy faces, it doesnt absorb or yield to it, instead it feels skittery and chattery.
I don't regret buying it. But would avoid Tuflite in future. Super fast, minimal flex, with a stiff driving recoil kinda feel to it. But you must have clean waves. Wind blows it all over the place, and with layered or lumpy faces, it doesnt absorb or yield to it, instead it feels skittery and chattery.
Who is online
Users browsing this forum: No registered users and 231 guests