Page 1 of 26

Quadfather Project Board....

Posted: Thu Aug 06, 2009 12:56 pm
by pridmore
I am doing another project board ( ala The MORE the Merrier Project- AquaBat ) very soon and this one will be a Quadfather design. It will be around 6'3" - 6' 4" x 19 1/2" x 2 5/8", round tail quad so hopefully there is many of you guys who might be keen on having it for a while and putting this board thru its paces. I plan on shaping the board next week and should be ready within 3 weeks ( maybe ready for a board testing day I have planned on the Sunny Coast on the 30th August )...anyway, I would be keen to hear from anyone who is keen on trying it out....The MTM project was lots of fun and some friends were made so hopefully this time will be the same if not better....cheers,
Mark 8)

ps- a cool- witty name for the project would be great if anyone can think of something- using the words Quadfather and or MORE..???

Re: Quadfather Project Board....

Posted: Thu Aug 06, 2009 1:03 pm
by Grooter
Sounds like a good board for the beachies down my way.

Happy to put it through its paces at Gunnamatta a la the Fat Bat, hopefully it won't be a 44 degree day this time and I'll get some footage that is better.

Oh and the bloody thing better not dent my head like the Fat Bat, the scar is still just faintly there!

Re: Quadfather Project Board....

Posted: Thu Aug 06, 2009 1:26 pm
by Surfin Turf
If/when it ends up with Butts at some stage I'll have a lash ...

Re: Quadfather Project Board....

Posted: Thu Aug 06, 2009 2:01 pm
by LONGINUS
Great idea Mark - How About

"Quadrophenia-Make War No MORE"
Image

Re: Quadfather Project Board....

Posted: Thu Aug 06, 2009 2:18 pm
by pridmore
well its winning....first one but...what about some of the lines from 'The Godfather' movie ??? great to see how many people are keen already, good stuff... 8)

Re: Quadfather Project Board....

Posted: Thu Aug 06, 2009 5:00 pm
by entropy
ummm...quadimodo...? or you could link it in with the 1964 film 633 Squadron ( http://en.wikipedia.org/wiki/633_Squadron) , especially using the measurements you have posted 6'3-6'4, how about going 6'3.3" Quadron?
Good line to use in your promotional material: The entire squadron is lost, except for Grant and his navigator. However, the mission is a success. Back in England, Air Vice Marshal Davis (Andrews) delivers the film's most famous line as he tells a fellow officer: "You can't kill a squadron."

Re: Quadfather Project Board....

Posted: Thu Aug 06, 2009 10:47 pm
by diggerdickson
keen to have a go for sure mate :D

Re: Quadfather Project Board....

Posted: Fri Aug 07, 2009 8:54 am
by roundhouse
Yeah id be keen to have a crack. I would come to your day on the sunny coast but will be in indo at the time. Hopefully you can leave it with someone on the coast and I can have a go when there done. dims sound good for grovelling on a few small point waves

Re: Quadfather Project Board....

Posted: Fri Aug 07, 2009 10:53 am
by steve shearer
What about the Quad-fer.
As in " I made him a quad-fer he couldn't refuse".

Re: Quadfather Project Board....

Posted: Fri Aug 07, 2009 8:31 pm
by Cpt.Caveman
What about - I'm gonna make him an offer he can't refuse - "The black hand of MORE surfboards..." - The Quadfather.

Or instead of a black hand, the colour of the board (pink MP? :P or maybe aqua). You can even have a black hand-print on the board.

I remember hearing the story that if you received a black hand in the mail, it meant that the mafia will knock you off soon.

Re: Quadfather Project Board....

Posted: Fri Aug 07, 2009 8:39 pm
by pridmore
interesting ...maybe I should just watch the film... :roll: maybe just "Project Quadfather" (PQF).?.
I'm keen to see what people think of the round tail with the quad...coz I love it and everyone who has tried one really enjoys them .... 8)

Re: Quadfather Project Board....

Posted: Sat Aug 08, 2009 7:03 am
by Cpt.Caveman
I'd be keen to give it a try if Butts gets his hands on it, even if I've already got one... bahah :D

Re: Quadfather Project Board....

Posted: Sat Aug 08, 2009 7:07 am
by pridmore
It will definitely get down to the northern beaches...Butts is a busy man lately but I have told him about the project and hopefully he;ll have time to take a few of his cool pics....Salty goes pretty good with a camera too.... 8)

Re: Quadfather Project Board....

Posted: Sat Aug 08, 2009 7:17 pm
by Jimi
Sounds good mark, ill definatly be up for a ride once it gets to the northern beaches. Sounds a little like the 6'4 round tail thruster you did me as my step-up board, Id love to try it in a quad.

Re: Quadfather Project Board....

Posted: Sun Aug 09, 2009 10:45 am
by ric_vidal
The Don - An offer you can't refuse

Re: Quadfather Project Board....

Posted: Wed Aug 12, 2009 2:00 pm
by OddaP
I'm in if the Quadfather can make it our western shores Mark :D

Re: Quadfather Project Board....

Posted: Mon Aug 17, 2009 4:18 pm
by pridmore
I shaped it today and it came up pretty nice ( IMO )...dims are 6'4" x 19 3/8" x 2 5/8", single to double, round tail, quad..should float most guys up to about 90 kg's.....theres a bit of volume there but the rails arent too full and combined with its rocker and bottom shape, it should be fairly responsive....post some pics of the shape tomorrow... 8)

Re: Quadfather Project Board....

Posted: Tue Aug 18, 2009 10:43 am
by LONGINUS
Hey Mark,

We can get Matt Smith www.vieu.com to shoot it around the gong as we did for the Fat Bat. The last relay transfer down south seemed to work out okay. Hope to help really get it off shore this time, whats your time frame for getting it around Sydney? towards end of year might be a trip to The Carolines. What fins are you going to run it with - butterflies?