Never surfed a stringerless epoxy.
There’s a creased board on the bumtree which is a perfect size for me. (Gary McNeill entity)
It’s not completely snapped, has a crack along the bottom around the middle of the board.
Rough cost to repair?
How much difference from a freshie? It’s looks pretty good otherwise.
I’m pretty much done buying customs for now.
Stringerless epoxy crease repair
Moderators: collnarra, PeepeelaPew, Butts, Shari
Stringerless epoxy crease repair
Live in the sunshine, swim the sea, drink the wild air.
- black duck
- Snowy McAllister
- Posts: 5099
- Joined: Wed Feb 25, 2009 10:47 am
Re: Stringerless epoxy crease repair
Is this a troll Jet? Why would you buy a fundamentally fcuked board? Forget about it.
Re: Stringerless epoxy crease repair
$100 -150 for a A1 repair.. its a nice little board
Be a good score for $100
Be a good score for $100
- marauding mullet
- Duke Status
- Posts: 11590
- Joined: Sun Oct 20, 2013 9:13 pm
- Location: an upside down valiant
Re: Stringerless epoxy crease repair
The Ding King in Adelaide repairs creased and snapped boards every day, eps and pu foam.
Guaranteed better than new. I know you aren’t in SA but there must be repair shops that confidently and economically do it elsewhere.
Search “the ding king vehicle body shop” on FaceBook, some very interesting posts, mostly on repairing eps boards which have become their bread and butter by the sounds of it.
Guaranteed better than new. I know you aren’t in SA but there must be repair shops that confidently and economically do it elsewhere.
Search “the ding king vehicle body shop” on FaceBook, some very interesting posts, mostly on repairing eps boards which have become their bread and butter by the sounds of it.
Re: Stringerless epoxy crease repair
A stringerless EPS (epoxy is the resin not the foam) has all the strength in the sandwich/outer glass, particularly the rails.
It'll never be the same, regardless of the quality of the repair. It might be ok, but there's a reason it's cheap, and for sale.
I assume you mean this board
![Image](https://i.ebayimg.com/images/g/~nYAAOSwA4Rc17V1/s-l400.webp)
It is fcuked. Put on your jetpack and fly away.
It'll never be the same, regardless of the quality of the repair. It might be ok, but there's a reason it's cheap, and for sale.
I assume you mean this board
![Image](https://i.ebayimg.com/images/g/~nYAAOSwA4Rc17V1/s-l400.webp)
It is fcuked. Put on your jetpack and fly away.
Re: Stringerless epoxy crease repair
Definitely not a troll. We live in such a f#@ked up repair by replacement culture that I thought i’d try to give it a second life.black duck wrote: ↑Sun May 12, 2019 7:03 pmIs this a troll Jet? Why would you buy a fundamentally fcuked board? Forget about it.
I’ve just never owned let alone damaged a stringerless epoxy board. Worth the question. Especially seeing as such a board new is around a grand new.
You’re link didn’t work, it’s a swallow tailed entity by Gary McNeill. 5’11 x 19 3/4 x 2 9/16alakaboo wrote: ↑Mon May 13, 2019 7:05 amA stringerless EPS (epoxy is the resin not the foam) has all the strength in the sandwich/outer glass, particularly the rails.
It'll never be the same, regardless of the quality of the repair. It might be ok, but there's a reason it's cheap, and for sale.
I assume you mean this board
It is fcuked. Put on your jetpack and fly away.
People get so hung up about repaired boards. Carry on like they’re all pros on the tour. If the repaired board was a bit heavier, but still retained some of the desired characteristics of such a construction then i’d Just see it as an opportunity to try a new design/construction for cheap.
Last edited by JET01 on Mon May 13, 2019 6:37 pm, edited 2 times in total.
Live in the sunshine, swim the sea, drink the wild air.
Re: Stringerless epoxy crease repair
Just buy the fcuking thing then.
It'll snap at the edge of the repair, but you'll no doubt have some fun before it does.
It'll snap at the edge of the repair, but you'll no doubt have some fun before it does.
-
- That's Not Believable
- Posts: 68827
- Joined: Mon Apr 25, 2005 8:21 am
- Location: Button Factory
Re: Stringerless epoxy crease repair
I've done some big fin chops and my current one had a crushed chunk in the rail and a hole in the bottom. Happy with most of the repairs except the crushed rail. Don't think Id go for a creased board though.
Put your big boy pants on
I mean, tastebuds? WGAF?
I mean, tastebuds? WGAF?
Re: Stringerless epoxy crease repair
Look at Boo getting all manly, seems my mentoring is paying dividends.
Trev wrote:I have always had a lot of time for Dick
smnmntll wrote:Got one in the mouth once, that was pretty memorable
Re: Stringerless epoxy crease repair
Mate, no-one comes close to your experience in forcefully giving bad advice online.
-
- regular
- Posts: 294
- Joined: Mon Jan 10, 2011 5:30 pm
Re: Stringerless epoxy crease repair
did you end up buying that?
was a mate of mine's. I offered to fix it, but never saw how bad it was.
was a mate of mine's. I offered to fix it, but never saw how bad it was.
Who is online
Users browsing this forum: No registered users and 70 guests