Discuss shaping and repairing techniques here.
Moderators: collnarra, PeepeelaPew, Butts, Shari
-
ric_vidal
- Snowy McAllister
- Posts: 6124
- Joined: Wed Apr 28, 2004 4:34 pm
Post
by ric_vidal » Sat Dec 15, 2012 9:20 pm
oldman wrote:I know just the place for that board RV.
Part of the plan, Olds, if the board and I get on.
Seems some more interest bubbling away but non committal.
-
ric_vidal
- Snowy McAllister
- Posts: 6124
- Joined: Wed Apr 28, 2004 4:34 pm
Post
by ric_vidal » Sun Dec 16, 2012 11:01 am
wingnut2443 wrote:Does not look too low in volume ... I'll try and put mine up (later today).
All about feel, she'll be right. It is only going to get bigger
![Wink :wink:](./images/smilies/icon_wink.gif)
-
ric_vidal
- Snowy McAllister
- Posts: 6124
- Joined: Wed Apr 28, 2004 4:34 pm
Post
by ric_vidal » Mon Feb 04, 2013 11:56 am
Time is a waisting'
Cleaned up.
![DSCN1337.jpg](./download/file.php?id=8820&sid=1aaef19afdbb8adf750898e4e3fb9c45)
- DSCN1337.jpg (21.37 KiB) Viewed 17934 times
![DSCN1339.jpg](./download/file.php?id=8821&sid=1aaef19afdbb8adf750898e4e3fb9c45)
- DSCN1339.jpg (20.96 KiB) Viewed 17934 times
-
ric_vidal
- Snowy McAllister
- Posts: 6124
- Joined: Wed Apr 28, 2004 4:34 pm
Post
by ric_vidal » Tue Feb 05, 2013 10:13 am
No tricks MF, next time it comes out of hiding I'll see if I can measure it.
-
ric_vidal
- Snowy McAllister
- Posts: 6124
- Joined: Wed Apr 28, 2004 4:34 pm
Post
by ric_vidal » Tue Feb 05, 2013 1:25 pm
That's fantastic, p_a, very reminiscent of the Tak scorpion. Should go a treat.
How big is that puppy?
-
pirate_agenda
- regular
- Posts: 294
- Joined: Mon Jan 10, 2011 5:30 pm
Post
by pirate_agenda » Thu Feb 07, 2013 10:00 am
that one is 6'0 x 21 x 2 5/8 - very full rails, but foiled out a little to the nose and tail.
very flat rocker in the front, and a bit of kick in the tail, almost like the rocker is back to front, and a quite deep single concave running the full length. Guy that bought it has been riding it as a quad so far and his comments have been that it catches waves super easy and nose rides really well, and drives through turns.
tossing up between one of these or a new twin keel mini simmonsesque board for myself.
-
pirate_agenda
- regular
- Posts: 294
- Joined: Mon Jan 10, 2011 5:30 pm
Post
by pirate_agenda » Thu Feb 07, 2013 10:08 am
saltman - they way i was thinking is that its kind of like a mini simmons with 8-12 inches of pin tail on the end, so i'd compromise between a mini simmons and mid length shape. The guy i made this for was originally going to be on a 5'2 mini simmons, but had a change of heart. I wouldn't go too short without beefing up the tail width quite a bit, or chopping it off!
PS the tint job above was to match the guys vintage style motorcycle.
-
ric_vidal
- Snowy McAllister
- Posts: 6124
- Joined: Wed Apr 28, 2004 4:34 pm
Post
by ric_vidal » Thu Feb 07, 2013 2:26 pm
pirate_agenda wrote:that one is 6'0 x 21 x 2 5/8 - very full rails, but foiled out a little to the nose and tail.
tossing up between one of these or a new twin keel mini simmonsesque board for myself.
p_a, if it goes anything like a Scorpion I can tell you they are very versatile, mine is large at 7' but take it out in pretty much anything. I would go one of these over a Simmon's type board any day.
-
ric_vidal
- Snowy McAllister
- Posts: 6124
- Joined: Wed Apr 28, 2004 4:34 pm
Post
by ric_vidal » Fri Feb 08, 2013 2:38 pm
WANDERER wrote:You lot should check some of the shorter stuff kookbox is doing;
Interesting stuff Wands, you tried anything similar or still just scouring fleabay for appropriate bargains of interest?
I'm with matt, one of each…
-
ric_vidal
- Snowy McAllister
- Posts: 6124
- Joined: Wed Apr 28, 2004 4:34 pm
Post
by ric_vidal » Fri Feb 08, 2013 2:40 pm
Still think the short version of these, say like pirate's, would be a very different kettle o' fish compared to a mid-length.
-
pirate_agenda
- regular
- Posts: 294
- Joined: Mon Jan 10, 2011 5:30 pm
Post
by pirate_agenda » Sat Feb 09, 2013 10:49 am
have done similar in the past also! i think this one was 5'4 ish ... a lot fuller in the tail at this size though.
-
spork
- barnacle
- Posts: 1276
- Joined: Mon Oct 31, 2011 6:01 pm
Post
by spork » Sat Feb 09, 2013 4:17 pm
![almerrick_surfboard-the_gravy1-thumbnail2.jpg](./download/file.php?id=8857&sid=1aaef19afdbb8adf750898e4e3fb9c45)
- almerrick_surfboard-the_gravy1-thumbnail2.jpg (23.36 KiB) Viewed 17777 times
This is my little one, not quite so teardrop shaped but a great small wave board none the less. 5'9"x20.5"x2.5"
When it gets to this level of self important stupidity I lose interest.
Roy Stewart
-
ric_vidal
- Snowy McAllister
- Posts: 6124
- Joined: Wed Apr 28, 2004 4:34 pm
Post
by ric_vidal » Mon Feb 18, 2013 9:06 am
Ha, gorn nowhere, still in incubation phase…
Had to make some glassing stands of some description.
-
ric_vidal
- Snowy McAllister
- Posts: 6124
- Joined: Wed Apr 28, 2004 4:34 pm
-
ric_vidal
- Snowy McAllister
- Posts: 6124
- Joined: Wed Apr 28, 2004 4:34 pm
Post
by ric_vidal » Mon May 30, 2016 11:02 am
Dims only really changed in length. Now 5'11", ride is fast, feels like the fastest I've ridden. Slices through cutbacks with the really fine rails that I thought may be a problem.
Who is online
Users browsing this forum: No registered users and 65 guests