Wavecraft:Show us your shaping bay (shed,shack, room)
Moderators: collnarra, PeepeelaPew, Butts, Shari
- wavecraft surfboards
- newbie
- Posts: 23
- Joined: Thu Jul 24, 2008 9:23 am
- Location: West Hills CA.
- Contact:
Wavecraft:Show us your shaping bay (shed,shack, room)
No matter how nice, crappy or obscure the location may be, let us see it.
- Attachments
-
- 10'x20' Shed enough to net a 9'6"x 13'6" shaping bay with a 5'6"x9'6" utility/storage room in the back that houses a dust collector and a 33 gallon compressor some room for misc. tools and some unshaped blanks.
- Wavecraft shaping room 014.jpg (37.57 KiB) Viewed 7179 times
-
- Can also be configured to be a Twin fin, Twinzer, Thruster, Quad or Quad+1 as well as a B-5 bonzer.
- 6'7 Wavecraft winger swallow tial B-5 Bonzer 031.jpg (31.75 KiB) Viewed 7179 times
-
- Can also be configured to be a Twin fin, Twinzer, Thruster, Quad or Quad+1 as well as a B-5 bonzer.
- 6'7 Wavecraft winger swallow tial B-5 Bonzer 019.jpg (35.38 KiB) Viewed 7179 times
-
- My baby's
- Wavecraft shaping room 011.jpg (36.07 KiB) Viewed 7179 times
-
- Light box
- Wavecraft shaping room 013.jpg (26.13 KiB) Viewed 7179 times
-
- Light box
- Wavecraft shaping room 012.jpg (33.03 KiB) Viewed 7179 times
-
- Wavecraft shaping room 009.jpg (33.72 KiB) Viewed 7179 times
Last edited by wavecraft surfboards on Sun Sep 18, 2011 11:25 am, edited 6 times in total.
Mitch (Wavecraft Surfboards)
-
- barnacle
- Posts: 2319
- Joined: Sat Jan 10, 2009 11:26 am
- Location: home is where the heart is.
Re: Show us your shaping bay (shed,shack, room)
damn, that is a beautiful shed set up, love it mate, wish I could get a shed like that to play with.
no, Im not a surfer, Im just a garbage man".
Re: Show us your shaping bay (shed,shack, room)
My god that's too clean!!!
Are you sure it's not a museum?
Nice setup mate
Are you sure it's not a museum?
Nice setup mate
Re: Show us your shaping bay (shed,shack, room)
Your lawn is horrendous mate!
- wavecraft surfboards
- newbie
- Posts: 23
- Joined: Thu Jul 24, 2008 9:23 am
- Location: West Hills CA.
- Contact:
Re: Show us your shaping bay (shed,shack, room)
-
Last edited by wavecraft surfboards on Thu Jun 09, 2011 11:17 am, edited 1 time in total.
Mitch (Wavecraft Surfboards)
- wavecraft surfboards
- newbie
- Posts: 23
- Joined: Thu Jul 24, 2008 9:23 am
- Location: West Hills CA.
- Contact:
Re: Show us your shaping bay (shed,shack, room)
You can do it. Just a little at a time. It will come together. Go for it.diggerdickson wrote:damn, that is a beautiful shed set up, love it mate, wish I could get a shed like that to play with.
Mitch (Wavecraft Surfboards)
- wavecraft surfboards
- newbie
- Posts: 23
- Joined: Thu Jul 24, 2008 9:23 am
- Location: West Hills CA.
- Contact:
Re: Show us your shaping bay (shed,shack, room)
I know it's bad but so is the water bill. If things get better I'll plant a nice lawn and water it too. Some day I'll make it better. by the way that's a nice shed you have there.tiger wrote:Your lawn is horrendous mate!
Mitch (Wavecraft Surfboards)
- wavecraft surfboards
- newbie
- Posts: 23
- Joined: Thu Jul 24, 2008 9:23 am
- Location: West Hills CA.
- Contact:
Re: Show us your shaping bay (shed,shack, room)
I had just swept it out before I took the pics. Should have seen it the day before. If you had you'd be telling me to clean up dump it on top of a mountain and go skiing.gibber wrote:My god that's too clean!!!
Are you sure it's not a museum?
Nice setup mate
Mitch (Wavecraft Surfboards)
Re: Show us your shaping bay (shed,shack, room)
Welcome to posting in Australia , we are allowed, and in some cases required to put water tanks on our sheds to water the "lawn", I haven't got a shaping shed but I admire your internals keep posting.wavecraft surfboards wrote:I know it's bad but so is the water bill. If things get better I'll plant a nice lawn and water it too. Some day I'll make it better. by the way that's a nice shed you have there.tiger wrote:Your lawn is horrendous mate!
Here's our local shaper in his shack
Jaffa, I'm opinionated, and I'm sometimes right. So?
Re: Wavecraft:Show us your shaping bay (shed,shack, room)
Do you get boards off Luke ots?
In a past life (career) I tracked down some carbon rail tape for him. Never hot a chance to see how things went for him unfortunately as I got a dcm due to the gfc.
In a past life (career) I tracked down some carbon rail tape for him. Never hot a chance to see how things went for him unfortunately as I got a dcm due to the gfc.
-
- Owl status
- Posts: 4893
- Joined: Sat Nov 11, 2006 9:15 pm
- Location: i live in a pineapple under the sea
Re: Show us your shaping bay (shed,shack, room)
tiger wrote:Your lawn is horrendous mate!
p.s but were do u do the real work? i.e glass and sand
reginald wrote:Hang on, now all of a sudden I'm the bad guy. How the try again did that happen?
- sixfootstix
- Grommet
- Posts: 39
- Joined: Wed Mar 26, 2008 11:27 pm
Re: Wavecraft:Show us your shaping bay (shed,shack, room)
Holy crap... you have a holster for your saw and an electric pencil sharpener. I cant even find my pencils.
Here is a photo of my poorly lit and cluttered shaping bay.
Here is a photo of my poorly lit and cluttered shaping bay.
- wavecraft surfboards
- newbie
- Posts: 23
- Joined: Thu Jul 24, 2008 9:23 am
- Location: West Hills CA.
- Contact:
Re: Wavecraft:Show us your shaping bay (shed,shack, room)
As long as you're shaping is all that matters.sixfootstix wrote:Holy crap... you have a holster for your saw and an electric pencil sharpener. I cant even find my pencils.
Here is a photo of my poorly lit and cluttered shaping bay.
Mitch (Wavecraft Surfboards)
- Cpt.Caveman
- barnacle
- Posts: 1594
- Joined: Sun Nov 21, 2004 9:13 am
- Location: Sydney - Everywhere and nowhere.
Re: Wavecraft:Show us your shaping bay (shed,shack, room)
Complete with beer fridge
Davros wrote:Ego saved - surfing experience rubbish.
- sixfootstix
- Grommet
- Posts: 39
- Joined: Wed Mar 26, 2008 11:27 pm
Re: Wavecraft:Show us your shaping bay (shed,shack, room)
What do you guys do with the PU blank off cuts. I have noticed a lot of people hang onto them, but what for. Seems to just be more clutter. (wavecraft has inspired me to tidy up my workshop)
Re: Wavecraft:Show us your shaping bay (shed,shack, room)
looks goodsixfootstix wrote:Holy crap... you have a holster for your saw and an electric pencil sharpener. I cant even find my pencils.
Here is a photo of my poorly lit and cluttered shaping bay.
- wavecraft surfboards
- newbie
- Posts: 23
- Joined: Thu Jul 24, 2008 9:23 am
- Location: West Hills CA.
- Contact:
Re: Wavecraft:Show us your shaping bay (shed,shack, room)
Sometimes use the bones (rail cut offs) to pad rails in shipping boxes.sixfootstix wrote:What do you guys do with the PU blank off cuts. I have noticed a lot of people hang onto them, but what for. Seems to just be more clutter. (wavecraft has inspired me to tidy up my workshop)
Mitch (Wavecraft Surfboards)
- wavecraft surfboards
- newbie
- Posts: 23
- Joined: Thu Jul 24, 2008 9:23 am
- Location: West Hills CA.
- Contact:
Re: Show us your shaping bay (shed,shack, room)
I send them out to get glassed these days.mustkillmulloway wrote:tiger wrote:Your lawn is horrendous mate!
p.s but were do u do the real work? i.e glass and sand
Mitch (Wavecraft Surfboards)
Who is online
Users browsing this forum: No registered users and 55 guests